Re: [issue1158] Problems with a SATA DVD burner

["Steve O'Hara-Smith" <steve@xxxxxxxxxx>]

On Thu, 11 Dec 2008 07:15:53 -0800
Jeremy Chadwick <jdc@parodius.com> wrote:

> On Thu, Dec 11, 2008 at 01:53:15PM +0000, Steve O'Hara-Smith wrote:
> > On Thu, 11 Dec 2008 04:50:51 -0800

> > 	It's not actually connected to the Promise, it's connected to
> > the VIA controller plugged in right next to the Seagate drive. The
> > Promise controller has ad4 (SATA) and ad8 (PATA) connected to it, the
> > VIA has ad10 (SATA), cd0 (SATA) and cd1 (PATA) connected to it. I am
> > deeply suspicious about the mention of ata4 for two different devices
> > (ad8 and cd0) connected to two different controllers.
> 
> So, part of the complexity is that your Promise controller offers both
> SATA **and** PATA.

	Yes the Promise controller has two SATA ports and one PATA port.
I'm using the PATA and one of the SATA ports. The VIA controller has two
PATA and two SATA ports, I'm using both SATA and one of the PATA.


> Well, the breakdown is this:
> 
> atapci0 = Promise FastTrak RAID
> 	--> ata2 (SATA)
> 		--> ad4 = Maxtor 6Y250M0
> 	--> ata3 (SATA)
> 	--> ata4 (PATA)
> 		--> ad8 (master?) = Maxtor 6Y120P0

So far so good

> 		--> cd0 (slave?)  = TSSTcorp CDDVDW SH-S223F SB00

But this is not in fact connected to ata4 - it's connected to ata6.

> atapci1 = VIA 6420 SATA
> 	--> ata5
> 		--> ad10 = Seagate ST3300622AS
> 	--> ata6

	Yep but ...

> 		--> cd1 = LITE-ON DVD SOHD-167T 9S19

This is in fact connected to ata1 (I thought it was ata0 but it's ata1)

> atapci2 = VIA 8237 ATA133
> 	--> ata0
> 	--> ata1
> 
> cd0 showing up attached to ata4 (somehow) is indicative of a problem.
> 
> It might also help if you could provide "atacontrol list" output.  I
> assume DFBSD has atacontrol.

	Here it is:

ATA channel 0:
    Master:      no device present
    Slave:       no device present
ATA channel 1:
    Master: acd1 <LITE-ON DVD SOHD-167T/9S19> ATA/ATAPI revision 5
    Slave:       no device present
ATA channel 2:
    Master:  ad4 <Maxtor 6Y250M0/YAR51HW0> Unknown serial ATA version
    Slave:       no device present
ATA channel 3:
    Master:      no device present
    Slave:       no device present
ATA channel 4:
    Master:  ad8 <Maxtor 6Y120P0/YAR41BW0> ATA/ATAPI revision 7
    Slave:       no device present
ATA channel 5:
    Master: ad10 <ST3300622AS/3.AAE> Serial ATA v1.0
    Slave:       no device present
ATA channel 6:
    Master: acd0 <TSSTcorp CDDVDW SH-S223F/SB00> Serial ATA v1.0
    Slave:       no device present

	This listing matches where I have things plugged in.

-- 
C:>WIN                                      |   Directable Mirror Arrays
The computer obeys and wins.                | A better way to focus the sun
You lose and Bill collects.                 |    licences available see
                                            |    http://www.sohara.org/