Re: [issue1158] Problems with a SATA DVD burner

["Steve O'Hara-Smith" <steve@xxxxxxxxxx>]

On Wed, 10 Dec 2008 23:38:08 -0000
Matthew Dillon <bugs@lists.dragonflybsd.org> wrote:

> Matthew Dillon <dillon@apollo.backplane.com> added the comment:
> 
> I picked up a HP SATA DVD Writer today to play and so far it has worked
>     flawlessly with the latest HEAD.  I was able to format and write

	Seems I didn't try hard enough with the latest version of the code.
At boot I get reams of:

Dec 11 12:05:03 df1 kernel: intr 10 at 40001/40000 hz, livelocked limit
engaged! Dec 11 12:05:04 df1 kernel: intr 10 at 8604/20000 hz, livelock
removed

	With intermittent:

Dec 11 12:05:04 df1 kernel: unknown: FAILURE - INQUIRY timed out

	Early on there are messages like:

Dec 11 11:47:05 df1 kernel: **WARNING** waiting for the following device to
fini sh configuring:
Dec 11 11:47:05 df1 kernel: xpt:        func=0xc0146dd9 arg=0

	After a few of these there is:

Dec 11 11:47:05 df1 kernel: Giving up, interrupt routing is probably hosed

	Eventually however (and this is the bit I didn't wait long enough
for last time round) I get:

Dec 11 12:05:04 df1 kernel: cd0 at ata4 bus 0 target 0 lun 0
Dec 11 12:05:04 df1 kernel: cd0: <TSSTcorp CDDVDW SH-S223F SB00> Removable
CD-ROM SCSI-0 device Dec 11 12:05:04 df1 kernel: cd0: 3.300MB/s transfers
Dec 11 12:05:04 df1 kernel: cd0: cd present [2295104 x 2048 byte records]
Dec 11 12:05:04 df1 kernel: cd1 at ata6 bus 0 target 0 lun 0
Dec 11 12:05:04 df1 kernel: cd1: <LITE-ON DVD SOHD-167T 9S19> Removable
CD-ROM SCSI-0 device Dec 11 12:05:04 df1 kernel: cd1: 3.300MB/s transfers
Dec 11 12:05:04 df1 kernel: cd1: Attempt to query device size failed: NOT
READY, Medium not present

	The livelock messages go away - and once I reenable DMA on atapi
(it gets turned off somewhere along the line in the boot process)
everything works fine. It just takes 15-20 minutes to get there.

	I'm using an Asus A8V Deluxe motherboard - dmesg | grep ata

atapci0: <Promise PDC20378 SATA150 controller> port 0x8800-0x887f,0x9000-0x900f,0x9400-0x943f mem 0xfb700000-0xfb71ffff,0xfb800000-0xfb800fff irq 5 at device 8.0 on pci0
ata2: <ATA channel 0> on atapci0
ad4: 239372MB <Maxtor 6Y250M0 YAR51HW0> at ata2-master SATA150
ata3: <ATA channel 1> on atapci0
ata4: <ATA channel 2> on atapci0
ad8: 117246MB <Maxtor 6Y120P0 YAR41BW0> at ata4-master UDMA133
atapci1: <VIA 6420 SATA150 controller> port 0xa800-0xa8ff,0xb000-0xb00f,0xb400-0xb403,0xb800-0xb807,0xc000-0xc003,0xc400-0xc407 irq 10 at device 15.0 on pci0
ata5: <ATA channel 0> on atapci1
ad10: 286168MB <Seagate ST3300622AS 3.AAE> at ata5-master SATA150
ata6: <ATA channel 1> on atapci1
atapci2: <VIA 8237 UDMA133 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
ata0: <ATA channel 0> on atapci2
ata1: <ATA channel 1> on atapci2
cd0 at ata4 bus 0 target 0 lun 0
cd1 at ata6 bus 0 target 0 lun 0

	The reuse of ata4 seems odd - related or irrelevant ?

-- 
C:>WIN                                      |   Directable Mirror Arrays
The computer obeys and wins.                | A better way to focus the sun
You lose and Bill collects.                 |    licences available see
                                            |    http://www.sohara.org/