Copyright (c) 2003-2017 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. Slab ZoneSize set to 128KB Leaving critical section, allowing interrupts ACPI SDT: RSDP in kenv hint ACPI FADT: SCI irq 9, conform/conform MPTABLE: warning PCI int dst apic id 255 does not exist MPTABLE: warning PCI int dst apic id 255 does not exist MPTABLE: warning PCI int dst apic id 255 does not exist MPTABLE: warning PCI int dst apic id 255 does not exist MPTABLE: warning PCI int dst apic id 255 does not exist MPTABLE: warning PCI int dst apic id 255 does not exist MPTABLE: warning PCI int dst apic id 255 does not exist MPTABLE: warning PCI int dst apic id 255 does not exist DragonFly v5.1.0.488.g554f8-DEVELOPMENT #3: Wed Dec 20 20:52:29 CET 2017 s@hyperv.yo:/usr/obj/home/s/projects/dragonfly/src/sys/HYPERV Calibrating clock(s) ... TSC clock: 2394626754 Hz (Method A) i8254 clock: 1195622 Hz hw.calibrate_timers_with_rtc not set - using default i8254 frequency hw.calibrate_timers_with_rtc not set - using old calibration method TSC clock: 2375182083 Hz CPU: Intel(R) Core(TM) i7-5500U CPU @ 2.40GHz (2375.18-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x306d4 Stepping = 4 Features=0x1f83fbff Features2=0xf6d83203 AMD Features=0x20100800 AMD Features2=0x121 Structured Extended Features=0x1c2328 npx mask: 0x0000ffff real memory = 6440942592 (6142 MB) Physical memory chunk(s): 0x00020000 - 0x0007ffff, 393216 bytes (96 pages) 0x00100000 - 0x001fffff, 1048576 bytes (256 pages) 0x03260000 - 0x03efffff, 13238272 bytes (3232 pages) 0x04000000 - 0xf7fdffff, 4093509632 bytes (999392 pages) 0x100000000 - 0x187fbffff, 2281439232 bytes (556992 pages) avail memory = 5992116224 (5714 MB) ACPI MADT: LAPIC address 0xfee00000, flags 0x1 ACPI MADT: BSP apic id 0 ACPI MADT: cpu id 0, acpi id 1, apic id 0 ACPI MADT: cpu id 1, acpi id 2, apic id 1 ACPI MADT: cpu id 2, acpi id 3, apic id 2 ACPI MADT: cpu id 3, acpi id 4, apic id 3 lapic: divisor index 0, frequency 99061575 Hz SMP: CPU0 apic_initialize(): lint0: 0x00000700 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff Bits within APICID: logical_CPU_bits: 0; core_bits: 2 CPU Topology: cores_per_chip: 4; threads_per_core: 1; chips_per_package: 1; MemAffinity 0000000000000000,3968MB Prox=0 CpuApicId 00 Socket 0 MemAffinity 0000000100000000,2176MB Prox=0 CpuApicId 00 Socket 0 MemAffinity 0000000188200000,58750MB Prox=0 CpuApicId 00 Socket 0 MemAffinity 0000001000000000,983040MB Prox=0 CpuApicId 00 Socket 0 SMI Frequency (worst case): 20000 Hz (50 us) SMP: Waiting APs LAPIC initialization SMP: CPU1 apic_initialize(): SMP: CPU3 apic_initialize(): lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff SMP: CPU2 apic_initialize(): lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff ELCR Found. ISA IRQs programmed as: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 E E E E E E E E E E E L E E E E Initialize MI interrupts objcache: magazine cap [6, 4102] Finish MP startup Active CPU Mask: 000000000000000f Preloaded elf kernel "kernel" at 0xffffffff82c88000. Preloaded elf obj module "acpi.ko" at 0xffffffff82c88250. Preloaded elf obj module "ehci.ko" at 0xffffffff82c88d28. Preloaded elf obj module "xhci.ko" at 0xffffffff82c89640. VMM: VMX is not supported by this Intel CPU start dummy scheduler helpers on cpus: 0 1 2 3 Start usched_bsd4 helpers on cpus: cpu0 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3) cpu1 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3) cpu2 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3) cpu3 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3) Start usched_dfly helpers on cpus: cpu0 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3) cpu1 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3) cpu2 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3) cpu3 - No HT available, multi-core/physical cpu. Physical siblings: cpus(0-3) Hyper-V Version: 10.0.16299 [SP0] Features=0xe7f PM Features=0x0 [C2] Features3=0x17b2 Recommends: 0000002c 00000fff Limits: Vcpu:64 Lcpu:512 Int:804 HW Features: 0000000f, AMD: 00000000 hyperv: Hypercall created wdog: In-kernel automatic watchdog reset enabled sensors: tasks default to cpu3 wlan: <802.11 Link Layer> ath_dfs: WTF module ath_rate: kbd: new array size 4 kbd1 at kbdmux0 md0: Malloc disk md0: invalid primary partition table: no magic crypto: hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 hpt27xx: RocketRAID 27xx controller driver v1.0 interrupt uses mplock: swi_taskq low dma reserve placed @ 0xfffff80176bc0000 ICU: rman cpu0 0 - 1 ICU: rman cpu0 3 - 95 ICU: rman cpu0 97 - 191 ICU: rman cpu1 16 - 95 ICU: rman cpu1 97 - 191 ICU: rman cpu2 16 - 95 ICU: rman cpu2 97 - 191 ICU: rman cpu3 16 - 95 ICU: rman cpu3 97 - 191 ACPI: RSDP 0x00000000000F5BF0 000014 (v00 ACPIAM) ACPI: RSDT 0x00000000F7FF0000 000040 (v01 VRTUAL MICROSFT 06001702 MSFT 00000097) ACPI: FACP 0x00000000F7FF0200 000081 (v02 VRTUAL MICROSFT 06001702 MSFT 00000097) ACPI: DSDT 0x00000000F7FF1D24 003CBE (v01 MSFTVM MSFTVM02 00000002 INTL 02002026) ACPI: FACS 0x00000000F7FFF000 000040 ACPI: WAET 0x00000000F7FF1A80 000028 (v01 VRTUAL MICROSFT 06001702 MSFT 00000097) ACPI: SLIC 0x00000000F7FF1AC0 000176 (v01 VRTUAL MICROSFT 06001702 MSFT 00000097) ACPI: OEM0 0x00000000F7FF1CC0 000064 (v01 VRTUAL MICROSFT 06001702 MSFT 00000097) ACPI: SRAT 0x00000000F7FF0800 000110 (v02 VRTUAL MICROSFT 00000001 MSFT 00000001) ACPI: APIC 0x00000000F7FF0300 000452 (v01 VRTUAL MICROSFT 06001702 MSFT 00000097) ACPI: OEMB 0x00000000F7FFF040 000064 (v01 VRTUAL MICROSFT 06001702 MSFT 00000097) cryptosoft0.nexus0.root0 cryptosoft0: [tentative] on motherboard crypto: assign cryptosoft0 driver id 0, flags 234881024 crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 2 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 3 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 4 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 5 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 16 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 6 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 7 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 18 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 19 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 20 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 8 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 15 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 9 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 10 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 13 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 14 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 11 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 22 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 23 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 24 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 28 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 25 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 26 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 27 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 21 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 29 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 30 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 31 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 32 flags 0 maxoplen 0 crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0 cryptosoft0: [attached!] on motherboard aesni0.nexus0.root0 aesni0: [tentative] on motherboard crypto: assign aesni0 driver id 1, flags 16777216 crypto: aesni0 registers alg 11 flags 0 maxoplen 0 crypto: aesni0 registers alg 22 flags 0 maxoplen 0 aesni0: [attached!] on motherboard padlock0: No ACE support. rdrand0.nexus0.root0 rdrand0: [tentative] on motherboard rdrand0: [attached!] on motherboard acpi0.nexus0.root0 acpi0: [tentative] on motherboard ACPI: 1 ACPI AML tables successfully acquired and loaded ACPI FADT: SCI testing interrupt mode ... ACPI FADT: SCI testing level/low ICU: irq 9, edge -> level ACPI FADT: SCI select level/low acpi0: Power Button (fixed) acpi_sysresource0.acpi0.nexus0.root0 acpi_sysresource0: [tentative] port 0x4d0-0x4d1,0x778-0x77f,0x678-0x67f,0x378-0x37f,0x278-0x27f,0x160-0x16f,0x1e0-0x1ef,0xe0-0xef,0xa2-0xbf,0x90-0x9f,0x8c-0x8e,0x88,0x84-0x86,0x80,0x72-0x7f,0x65-0x6f,0x62-0x63,0x44-0x5f,0x22-0x3f,0x10-0x1f on acpi0 acpi_sysresource0: [attached!] on acpi0 acpi_sysresource1.acpi0.nexus0.root0 acpi_sysresource1: [tentative] port 0x440-0x44f,0x370-0x371,0x400-0x43f iomem 0xfee00000-0xfee00fff,0xfec00000-0xfec00fff on acpi0 acpi_sysresource1: [attached!] on acpi0 acpi_sysresource2.acpi0.nexus0.root0 acpi_sysresource2: [tentative] iomem 0xfffc0000-0xffffffff,0x100000-0xf7ffffff,0xe0000-0xfffff,0xc0000-0xdffff,0-0x9ffff on acpi0 acpi_sysresource2: [attached!] on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 5 7 9 10 11 12 14 15 Validation 0 11 N 0 3 4 5 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 5 7 9 10 11 12 14 15 Validation 0 255 N 0 3 4 5 7 9 10 11 12 14 15 After Disable 0 255 N 0 3 4 5 7 9 10 11 12 14 15 pcib0.acpi0.nexus0.root0 pcib0: [tentative] port 0xcf8-0xcff on acpi0 ACPI: Found matching pin for 0.8.INTA at func 0: 11 ACPI: Found matching pin for 0.10.INTA at func 0: 11 pci0.pcib0.acpi0.nexus0.root0 pci0: [tentative] on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x7192, revid=0x03 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7110, revid=0x01 domain=0, bus=0, slot=7, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0200, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x7111, revid=0x01 domain=0, bus=0, slot=7, func=1 class=01-01-80, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) map[20]: type I/O Port, range 32, base 0xffa0, size 4, enabled found-> vendor=0x8086, dev=0x7113, revid=0x02 domain=0, bus=0, slot=7, func=3 class=06-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0001, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=255 found-> vendor=0x1414, dev=0x5353, revid=0x00 domain=0, bus=0, slot=8, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x011f, statreg=0x0000, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=11 map[10]: type Memory, range 32, base 0xf8000000, size 26, enabled pcib0: matched entry for 0.8.INTA (src \\_SB_.LNKA:0) pcib0: slot 8 INTA routed to irq 11 via \\_SB_.LNKA found-> vendor=0x1011, dev=0x0009, revid=0x20 domain=0, bus=0, slot=10, func=0 class=02-00-00, hdrtype=0x00, mfdev=1 cmdreg=0x0117, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x14 (5000 ns), maxlat=0x28 (10000 ns) intpin=a, irq=11 map[10]: type I/O Port, range 32, base 0xec00, size 7, enabled map[14]: type Memory, range 32, base 0xfebff000, size 12, enabled pcib0: matched entry for 0.10.INTA (src \\_SB_.LNKA:0) pcib0: slot 10 INTA routed to irq 11 via \\_SB_.LNKA isab0.pci0.pcib0.acpi0.nexus0.root0 isab0: [tentative] at device 7.0 on pci0 isa0.isab0.pci0.pcib0.acpi0.nexus0.root0 isa0: [tentative] on isab0 isa0: [attached!] on isab0 isab0: [attached!] at device 7.0 on pci0 atapci0.pci0.pcib0.acpi0.nexus0.root0 atapci0: [tentative] port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xffa0 ata0.atapci0.pci0.pcib0.acpi0.nexus0.root0 ata0: [tentative] on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0 atapci0: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6 ata0: reset tp1 mask=03 ostat0=50 ostat1=7f ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata0: reset tp2 stat0=50 stat1=ff devices=0x1 interrupt uses mplock: ata0 ata0: identify ch->devices=00000001 ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire ad0: setting PIO4 on PIIX4 chip ad0: setting WDMA2 on PIIX4 chip ad0: FAILURE - SETFEATURES ENABLE WCACHE status=51 error=0 ad0: Intel check1 failed ad0: Adaptec check1 failed ad0: LSI (v3) check1 failed ad0: LSI (v2) check1 failed ad0: FreeBSD check1 failed ad0: 130048MB at ata0-master WDMA2 ad0: 266338304 sectors [65278C/16H/255S] 16 sectors/interrupt 1 depth queue ata0: [attached!] on atapci0 ata1.atapci0.pci0.pcib0.acpi0.nexus0.root0 ata1: [tentative] on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170 atapci0: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376 ata1: reset tp1 mask=03 ostat0=50 ostat1=7f ata1: stat0=0x50 err=0x01 lsb=0x14 msb=0xeb ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: stat1=0x7f err=0x00 lsb=0x00 msb=0x00 ata1: reset tp2 stat0=50 stat1=ff devices=0x10000 interrupt uses mplock: ata1 ata1: identify ch->devices=00010000 ata1-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire ad0: type 0xa5, start 63, end = 266337791, size 266337729 : OK acd0: setting PIO4 on PIIX4 chip acd0: DVDROM drive at ata1 as master acd0: PIO4 acd0: Reads: DVDROM acd0: Writes: acd0: Audio: play acd0: Mechanism: ejectable tray acd0: Medium: CD-ROM unknown ata1: [attached!] on atapci0 atapci0: [attached!] port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 7.1 on pci0 pci0: (vendor 0x8086, dev 0x7113) at device 7.3 vgapci0.pci0.pcib0.acpi0.nexus0.root0 vgapci0: [tentative] mem 0xf8000000-0xfbffffff irq 11 at device 8.0 on pci0 vgapci0: Boot video device vgapci0: [attached!] mem 0xf8000000-0xfbffffff irq 11 at device 8.0 on pci0 de0.pci0.pcib0.acpi0.nexus0.root0 de0: [tentative] port 0xec00-0xec7f mem 0xfebff000-0xfebfffff irq 11 at device 10.0 on pci0 de0: Reserved 0x80 bytes for rid 0x10 type 4 at 0xec00 de0: 21140A [10-100Mb/s] pass 2.0 de0: bpf attached de0: MAC address: 00:15:5d:00:d7:01 de0: [attached!] port 0xec00-0xec7f mem 0xfebff000-0xfebfffff irq 11 at device 10.0 on pci0 pci0: [attached!] on pcib0 pcib0: [attached!] port 0xcf8-0xcff on acpi0 atkbdc0.acpi0.nexus0.root0 atkbdc0: [tentative] port 0x64,0x60 irq 1 on acpi0 atkbd0.atkbdc0.acpi0.nexus0.root0 atkbd0: [tentative] irq 1 on atkbdc0 kbd0 at atkbd0 kbd0: atkbd0, generic (0), config:0x0, flags:0x3d0000 atkbd0: [attached!] irq 1 on atkbdc0 psm0: current command byte:0065 de0: enabling 100baseTX port psm0.atkbdc0.acpi0.nexus0.root0 psm0: [tentative] irq 12 on atkbdc0 interrupt uses mplock: psm0 psm0: model IntelliMouse Explorer, device ID 4-00, 5 buttons psm0: config:00000000, flags:00000008, packet size:4 psm0: syncmask:08, syncbits:00 psm0: [attached!] irq 12 on atkbdc0 atkbdc0: [attached!] port 0x64,0x60 irq 1 on acpi0 sio0: irq maps: 0x1 0x11 0x1 0x1 sio0.acpi0.nexus0.root0 sio0: <16550A-compatible COM port> [tentative] port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio0: <16550A-compatible COM port> [attached!] port 0x3f8-0x3ff irq 4 on acpi0 sio1: irq maps: 0x1 0x9 0x1 0x1 sio1.acpi0.nexus0.root0 sio1: <16550A-compatible COM port> [tentative] port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A sio1: <16550A-compatible COM port> [attached!] port 0x2f8-0x2ff irq 3 on acpi0 unknown: not probed (disabled) cpu0.acpi0.nexus0.root0 cpu0: [tentative] on acpi0 cpu0: _OSC failed, using _PDC cpu_cst0.cpu0.acpi0.nexus0.root0 cpu_cst0: [tentative] on cpu0 cpu_cst0: switching to FADT Cx mode cpu_cst0: [attached!] on cpu0 cpu_pst0: Can't get _PCT package - AE_NOT_FOUND cpu0: [attached!] on acpi0 cpu1.acpi0.nexus0.root0 cpu1: [tentative] on acpi0 cpu1: _OSC failed, using _PDC cpu_cst1.cpu1.acpi0.nexus0.root0 cpu_cst1: [tentative] on cpu1 cpu_cst1: [attached!] on cpu1 cpu_pst1: Can't get _PCT package - AE_NOT_FOUND cpu1: [attached!] on acpi0 cpu2.acpi0.nexus0.root0 cpu2: [tentative] on acpi0 cpu2: _OSC failed, using _PDC cpu_cst2.cpu2.acpi0.nexus0.root0 cpu_cst2: [tentative] on cpu2 cpu_cst2: [attached!] on cpu2 cpu_pst2: Can't get _PCT package - AE_NOT_FOUND cpu2: [attached!] on acpi0 cpu3.acpi0.nexus0.root0 cpu3: [tentative] on acpi0 cpu3: _OSC failed, using _PDC cpu_cst3.cpu3.acpi0.nexus0.root0 cpu_cst3: [tentative] on cpu3 cpu_cst3: [attached!] on cpu3 cpu_pst3: Can't get _PCT package - AE_NOT_FOUND cpu3: [attached!] on acpi0 unknown: not probed (disabled) ACPI: Enabled 1 GPEs in block 00 to 0F acpi0: [attached!] at port 0x400-0x43f,0x370-0x371,0x440-0x44f,0x10-0x1f,0x22-0x3f,0x44-0x5f,0x62-0x63,0x65-0x6f,0x72-0x7f,0x80,0x84-0x86,0x88,0x8c-0x8e,0x90-0x9f,0xa2-0xbf,0xe0-0xef,0x1e0-0x1ef,0x160-0x16f,0x278-0x27f,0x378-0x37f,0x678-0x67f,0x778-0x77f,0x4d0-0x4d1 iomem 0-0x9ffff,0xc0000-0xdffff,0xe0000-0xfffff,0x100000-0xf7ffffff,0xfffc0000-0xffffffff,0xfec00000-0xfec00fff,0xfee00000-0xfee00fff irq 9 on motherboard Freeing low dma reserve @ 0xfffff80176bc0000 atkbdc-: atkbdc0 exists, using next available unit number sio-: sio0 exists, using next available unit number sio-: sio1 exists, using next available unit number sio-: sio2 exists, using next available unit number sio-: sio3 exists, using next available unit number Trying Read_Port at 203 Trying Read_Port at 243 Trying Read_Port at 283 Trying Read_Port at 2c3 Trying Read_Port at 303 Trying Read_Port at 343 Trying Read_Port at 383 Trying Read_Port at 3c3 isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices orm0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0 orm0: [tentative] at iomem 0xc0000-0xcbfff,0xcc000-0xcc7ff on isa0 orm0: [attached!] at iomem 0xc0000-0xcbfff,0xcc000-0xcc7ff on isa0 pmtimer0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0 pmtimer0 [tentative] on isa0 pmtimer0 [attached!] on isa0 adv0 [tentative] failed to probe on isa0 atkbdc1 [tentative] failed to probe at port 0x60 on isa0 vga0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0 vga0: [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xffffffff800b8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 03 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters to be used for mode 24 50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff vga0: [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0.isa0.isab0.pci0.pcib0.acpi0.nexus0.root0 sc0: [tentative] at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sc0: [attached!] at flags 0x100 on isa0 lm0 [tentative] failed to probe at port 0x290-0x297 on isa0 it0 [tentative] failed to probe at port 0x290-0x297 on isa0 it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0 it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0 it3 [tentative] failed to probe at port 0x228-0x22f on isa0 wbsio0 [tentative] failed to probe at port 0x2e-0x2f on isa0 wbsio1 [tentative] failed to probe at port 0x4e-0x4f on isa0 sio2 [tentative] failed to probe at port 0x3f8 irq 4 flags 0x10 on isa0 sio3 [tentative] failed to probe at port 0x2f8 irq 3 on isa0 sio4: not probed (disabled) sio5: not probed (disabled) lnc0: not probed (disabled) sn0: not probed (disabled) isa_probe_children: probing PnP devices C1: BitWidth(vendor) 0, BitOffset(class) 0, Address(arg0) 0x0, AccessWidth(arg1) 0x0 C1: BitWidth(vendor) 0, BitOffset(class) 0, Address(arg0) 0x0, AccessWidth(arg1) 0x0 C1: BitWidth(vendor) 0, BitOffset(class) 0, Address(arg0) 0x0, AccessWidth(arg1) 0x0 C1: BitWidth(vendor) 0, BitOffset(class) 0, Address(arg0) 0x0, AccessWidth(arg1) 0x0 cpu_cst: global Cx count 1 C1: BitWidth(vendor) 0, BitOffset(class) 0, Address(arg0) 0x0, AccessWidth(arg1) 0x0 C1: BitWidth(vendor) 0, BitOffset(class) 0, Address(arg0) 0x0, AccessWidth(arg1) 0x0 C1: BitWidth(vendor) 0, BitOffset(class) 0, Address(arg0) 0x0, AccessWidth(arg1) 0x0 C1: BitWidth(vendor) 0, BitOffset(class) 0, Address(arg0) 0x0, AccessWidth(arg1) 0x0 usbpf: Initialized crypto: lo0: bpf attached sl0: bpf attached hptrr: no controller detected. hpt27xx: no controller detected. CAM: Configuring bus: ata0 CAM: Configuring bus: ata1 CAM: Configuring 2 busses CAM: Finished configuring bus: ata0 CAM: Finished configuring bus: ata1 CAM: finished configuring all busses cd0 at ata1 bus 0 target 0 lun 0 cd0: Removable CD-ROM SCSI-5 device cd0: 16.000MB/s transfers cd0: Attempt to query device size failed: NOT READY, Medium not present ATA PseudoRAID loaded Mounting root from hammer:ad0s1d HAMMER(ROOT) recovery check seqno=06885406 HAMMER(ROOT) recovery range 300000001ef44138-300000001ef44138 HAMMER(ROOT) recovery nexto 300000001ef44138 endseqno=06885407 HAMMER(ROOT) mounted clean, no recovery needed DMA space used: 4136k, remaining available: 131072k Mounting devfs start_init: trying /sbin/init kthread 0xfffff80176ba6900 syncer6 has exited kthread 0xfffff80176b62c80 syncer7 has exited kthread 0xfffff80176ba6900 syncer8 has exited kthread 0xfffff80176ba6380 syncer9 has exited kthread 0xfffff80240ee5880 syncer10 has exited kthread 0xfffff80176b62c80 syncer11 has exited swap low/high-water marks set to 83883/125825