Re: HPET cputimer

[Hasso Tepper <hasso@xxxxxxxxx>]

Sepherosa Ziehau wrote:
> Haha, ok.  Please post the dmesg.

Here it is.


-- 
Hasso Tepper

Copyright (c) 2003-2009 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 2.3.0-DEVELOPMENT #13: Thu Apr 30 13:10:19 EEST 2009
    hasso@hasso.estpak.ee:/usr/obj/home/hasso/dragonfly-src/sys/GENERIC
TSC clock: 1864836288 Hz, i8254 clock: 1193202 Hz
CPU: Intel(R) Core(TM)2 CPU          6320  @ 1.86GHz (1864.81-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x6f6  Stepping = 6
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  Hyperthreading: 2 logical CPUs
real memory  = 2120380416 (2070684K bytes)
avail memory = 2043056128 (1995172K bytes)
DragonFly/MP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  0, version: 0x00050014, at 0xfee00000
 cpu1 (AP):  apic id:  1, version: 0x00050014, at 0xfee00000
 Warning: APIC I/O disabled
SMP: AP CPU #1 Launched!
objcache(exec-args): too small for ncpus, adjusting cluster_limit 16->32
Preloaded elf kernel "/boot/kernel" at 0xc0950000.
Preloaded elf module "/boot/modules/sound.ko" at 0xc09504b0.
Preloaded elf module "/boot/modules/snd_hda.ko" at 0xc095055c.
Preloaded elf module "/boot/modules/acpi.ko" at 0xc095060c.
Pentium Pro MTRR support enabled
md0: Malloc disk
ACPI: RSDP @ 0x0xfe020/0x0014 (v  0 INTEL )
ACPI: RSDT @ 0x0x7e6fd038/0x003C (v  1 INTEL  DQ965GF  0x000017BD      0x01000013)
ACPI: FACP @ 0x0x7e6fc000/0x0074 (v  1 INTEL  DQ965GF  0x000017BD MSFT 0x01000013)
ACPI: DSDT @ 0x0x7e6f7000/0x4304 (v  1 INTEL  DQ965GF  0x000017BD MSFT 0x01000013)
ACPI: FACS @ 0x0x7e685000/0x0040
ACPI: APIC @ 0x0x7e6f6000/0x0078 (v  1 INTEL  DQ965GF  0x000017BD MSFT 0x01000013)
ACPI: WDDT @ 0x0x7e6f5000/0x0040 (v  1 INTEL  DQ965GF  0x000017BD MSFT 0x01000013)
ACPI: MCFG @ 0x0x7e6f4000/0x003C (v  1 INTEL  DQ965GF  0x000017BD MSFT 0x01000013)
ACPI: ASF! @ 0x0x7e6f3000/0x00A6 (v 32 INTEL  DQ965GF  0x000017BD MSFT 0x01000013)
ACPI: TCPA @ 0x0x7e627000/0x0032 (v  2 INTEL  TIANO    0x00000002 MSFT 0x01000013)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <INTEL DQ965GF> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device.  You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_button0: <Sleep Button> on acpi0
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
agp0: <Intel Q965 SVGA controller> port 0x2410-0x2417 mem 0x80000000-0x8fffffff,0x90300000-0x903fffff irq 11 at device 2.0 on pci0
agp0: detected 7676k stolen memory
agp0: aperture size is 256M
pci0: <unknown card> (vendor=0x8086, dev=0x2993) at 2.1
pci0: <unknown card> (vendor=0x8086, dev=0x2994) at 3.0 irq 11
em0: <Intel(R) PRO/1000 Network Connection ICH8_IGP_AMT 6.9.6> port 0x20e0-0x20ff mem 0x90424000-0x90424fff,0x90400000-0x9041ffff irq 9 at device 25.0 on pci0
em0: MAC address: 00:19:d1:85:e3:c3
pci0: <UHCI USB controller> at 26.0 irq 11
pci0: <UHCI USB controller> at 26.1 irq 10
pci0: <USB controller> at 26.7 irq 11
pcm0: <Intel 82801H High Definition Audio Controller> mem 0x90420000-0x90423fff irq 9 at device 27.0 on pci0
pcib1: <PCI to PCI bridge (vendor=8086 device=283f)> at device 28.0 on pci0
pci1: <PCI bus> on pcib1
pcib2: <PCI to PCI bridge (vendor=8086 device=2841)> at device 28.1 on pci0
pci2: <PCI bus> on pcib2
atapci0: <Marvell 88SX6101 UDMA133 controller> port 0x1000-0x100f,0x1020-0x1023,0x1010-0x1017,0x1024-0x1027,0x1018-0x101f mem 0x90100000-0x901001ff irq 10 at device 0.0 on pci2
ata2: <ATA channel 0> on atapci0
pcib3: <PCI to PCI bridge (vendor=8086 device=2843)> at device 28.2 on pci0
pci3: <PCI bus> on pcib3
pcib4: <PCI to PCI bridge (vendor=8086 device=2845)> at device 28.3 on pci0
pci4: <PCI bus> on pcib4
pcib5: <PCI to PCI bridge (vendor=8086 device=2847)> at device 28.4 on pci0
pci5: <PCI bus> on pcib5
pci0: <UHCI USB controller> at 29.0 irq 11
pci0: <UHCI USB controller> at 29.1 irq 11
pci0: <UHCI USB controller> at 29.2 irq 11
pci0: <USB controller> at 29.7 irq 11
pcib6: <Intel 82801BA/CA/DB/EB/FB (ICH2/3/4/5/6) Hub to PCI bridge> at device 30.0 on pci0
pci6: <PCI bus> on pcib6
pci6: <unknown card> (vendor=0x104c, dev=0x8023) at 3.0 irq 11
isab0: <PCI to ISA bridge (vendor=8086 device=2814)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel AHCI controller> port 0x2020-0x203f,0x2418-0x241b,0x2400-0x2407,0x241c-0x241f,0x2408-0x240f mem 0x90425000-0x904257ff irq 11 at device 31.2 on pci0
atapci1: AHCI Version 01.10 controller with 6 ports detected
ata3: <ATA channel 0> on atapci1
intr 11 at 40001/40000 hz, livelocked limit engaged!
ad6: 238475MB <Hitachi HDT725025VLA380 V5DOA7EA> at ata3-master SATA300
ata4: <ATA channel 1> on atapci1
acd0: DVDR <TSSTcorp CDDVDW SH-S203B/SB00> at ata4-master SATA150
ata5: <ATA channel 2> on atapci1
ata6: <ATA channel 3> on atapci1
ata7: <ATA channel 4> on atapci1
ata8: <ATA channel 5> on atapci1
pci0: <unknown card> (vendor=0x8086, dev=0x283e) at 31.3 irq 10
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio2: can't drain, serial port might not exist, disabling
ppc1: cannot reserve I/O port range
ip: MPSAFE
arp: MPSAFE
pcm0: <HDA Codec: Sigmatel STAC9227>
pcm0: <HDA Driver Revision: 20071129_0050>
cd0 at ata2 bus 0 target 0 lun 0
cd0: <TSSTcorp CDDVDW SH-S203B SB00> Removable CD-ROM SCSI-0 device 
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
Mounting root from ufs:/dev/ad6s1a
intr 11 at 62/20000 hz, livelock removed
drmsub0: <Intel i965Q> on agp0
info: [drm] AGP at 0x80000000 256MB
info: [drm] Initialized i915 1.6.0 20080730