DragonFly users List (threaded) for 2008-12
[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index][Thread Index]
Hi,
Anyone knows if there is a plan to port the Attansic age(4) driver to DragonFly (and the Ralink wireless)?
I'll now try to boot an SMP kernel and as well see if FreeBSD supports the age(4) and wireless.
Btw, it's a nice little "laptop", except the fan, which makes too much noise IMO.
Regards,
Michael
[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index][Thread Index]
[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index][Thread Index]
ASUS Eee PC 1000H (age(4))
| From: | "nntp.dragonflybsd.org" <mneumann@xxxxxxxx> |
| Date: | Sat, 27 Dec 2008 20:12:04 +0100 |
Hi,
I've got an ASUS Eee PC 1000H and of course tried to boot DragonFly. It boots without any problems (see attached verbose dmesg and pciconf).
Anyone knows if there is a plan to port the Attansic age(4) driver to DragonFly (and the Ralink wireless)?
I'll now try to boot an SMP kernel and as well see if FreeBSD supports the age(4) and wireless.
Btw, it's a nice little "laptop", except the fan, which makes too much noise IMO.
Regards,
Michael
hostb0@pci0:0:0: class=0x060000 card=0x83401043 chip=0x27ac8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 945GME Express Processor to DRAM Controller'
class = bridge
subclass = HOST-PCI
agp0@pci0:2:0: class=0x030000 card=0x83401043 chip=0x27ae8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 945 Express Chipset Family'
class = display
subclass = VGA
none0@pci0:2:1: class=0x038000 card=0x83401043 chip=0x27a68086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 945GM/GU Express Integrated Graphics Controller'
class = display
none1@pci0:27:0: class=0x040300 card=0x831a1043 chip=0x27d88086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) High Definition Audio'
class = multimedia
pcib1@pci0:28:0: class=0x060400 card=0x00000040 chip=0x27d08086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCIe Root Port'
class = bridge
subclass = PCI-PCI
pcib2@pci0:28:1: class=0x060400 card=0x00000040 chip=0x27d28086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCIe Root Port'
class = bridge
subclass = PCI-PCI
pcib3@pci0:28:3: class=0x060400 card=0x00000040 chip=0x27d68086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCIe Root Port'
class = bridge
subclass = PCI-PCI
uhci0@pci0:29:0: class=0x0c0300 card=0x830f1043 chip=0x27c88086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci1@pci0:29:1: class=0x0c0300 card=0x830f1043 chip=0x27c98086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci2@pci0:29:2: class=0x0c0300 card=0x830f1043 chip=0x27ca8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci3@pci0:29:3: class=0x0c0300 card=0x830f1043 chip=0x27cb8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
none2@pci0:29:7: class=0x0c0320 card=0x830f1043 chip=0x27cc8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
pcib4@pci0:30:0: class=0x060401 card=0x00000050 chip=0x24488086 rev=0xe2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:31:0: class=0x060100 card=0x830f1043 chip=0x27b98086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GBM (ICH7-M) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0@pci0:31:2: class=0x010180 card=0x830f1043 chip=0x27c48086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GBM/GHM (ICH7-M Family) Serial ATA Storage Controller'
class = mass storage
subclass = ATA
none3@pci3:0:0: class=0x020000 card=0x83241043 chip=0x10261969 rev=0xb0 hdr=0x00
vendor = 'Attansic (Now owned by Atheros)'
device = 'L1 Gigabit Ethernet Adapter'
class = network
subclass = ethernet
none4@pci1:0:0: class=0x028000 card=0x27901814 chip=0x07811814 rev=0x00 hdr=0x00
vendor = 'Ralink Technology, Corp'
class = network
Copyright (c) 2003-2008 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 2.1.1-DEVELOPMENT #0: Sat Dec 27 00:48:18 CET 2008
root@chlamydia.fs.ei.tum.de:/usr/obj/usr/src/sys/GENERIC
Calibrating clock(s) ... TSC clock: 1596010932 Hz, i8254 clock: 1193189 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1596.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,<b22>>
Hyperthreading: 2 logical CPUs
real memory = 1064960000 (1040000K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x00899000 - 0x3f78ffff, 1055879168 bytes (257783 pages)
avail memory = 1019576320 (995680K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f0000
bios32: Entry = 0xf0010 (c00f0010) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x31
pnpbios: Found PnP BIOS data at 0xc00f8940
pnpbios: Entry = f0000:99fa Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/boot/kernel" at 0xc086c000.
Preloaded elf module "/boot/modules/acpi.ko" at 0xc086c24c.
wlan: <802.11 Link Layer>
crypto: <crypto core>
Pentium Pro MTRR support enabled
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80000094
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=27ac8086)
pcibios: BIOS version 3.00
Using $PIR table, 9 entries at 0xc00f86e0
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 1 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 1 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 1 D 0x63 3 4 5 6 7 10 11 12 14 15
embedded 0 2 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 30 A 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 30 B 0x68 3 4 5 6 7 10 11 12 14 15
embedded 0 31 A 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 31 B 0x63 3 4 5 6 7 10 11 12 14 15
embedded 0 27 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 28 A 0x60 3 4 5 6 7 10 11 12 14 15
embedded 0 28 B 0x61 3 4 5 6 7 10 11 12 14 15
embedded 0 28 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 28 D 0x63 3 4 5 6 7 10 11 12 14 15
embedded 0 29 A 0x6b 3 4 5 6 7 10 11 12 14 15
embedded 0 29 B 0x63 3 4 5 6 7 10 11 12 14 15
embedded 0 29 C 0x62 3 4 5 6 7 10 11 12 14 15
embedded 0 29 D 0x60 3 4 5 6 7 10 11 12 14 15
slot 35 1 0 A 0x63 3 4 5 6 7 10 11 12 14 15
slot 33 3 0 A 0x61 3 4 5 6 7 10 11 12 14 15
ACPI: RSDP @ 0x0xfb9e0/0x0014 (v 0 ACPIAM)
ACPI: RSDT @ 0x0x3f7a0000/0x003C (v 1 A_M_I_ OEMRSDT 0x10000817 MSFT 0x00000097)
ACPI: FACP @ 0x0x3f7a0200/0x0084 (v 2 A_M_I_ OEMFACP 0x10000817 MSFT 0x00000097)
ACPI: DSDT @ 0x0x3f7a05b0/0x5124 (v 1 A1028 A1028000 0x00000000 INTL 0x20051117)
ACPI: FACS @ 0x0x3f7ae000/0x0040
ACPI: APIC @ 0x0x3f7a0390/0x005C (v 1 A_M_I_ OEMAPIC 0x10000817 MSFT 0x00000097)
ACPI: MCFG @ 0x0x3f7a03f0/0x003C (v 1 A_M_I_ OEMMCFG 0x10000817 MSFT 0x00000097)
ACPI: OEMB @ 0x0x3f7ae040/0x0061 (v 1 A_M_I_ AMI_OEM 0x10000817 MSFT 0x00000097)
ACPI: HPET @ 0x0x3f7a56e0/0x0038 (v 1 A_M_I_ OEMHPET 0x10000817 MSFT 0x00000097)
ACPI: SSDT @ 0x0x3f7aeb80/0x04F0 (v 1 PmRef CpuPm 0x00003000 INTL 0x20051117)
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <A_M_I_ OEMRSDT> [tentative] on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
acpi_ec0.acpi0.nexus0.root0
acpi_ec0: <Embedded Controller: GPE 0x1c> [tentative] port 0x66,0x62 on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> [attached!] port 0x66,0x62 on acpi0
AcpiOsDerivePciId: bus 0 dev 31 func 0
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 4, max = 6, width = 2
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 4, max = 6, width = 2
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 5, max = 6, width = 1
ACPI timer looks GOOD min = 4, max = 6, width = 2
ACPI timer looks BAD min = 4, max = 7, width = 3
acpi_timer0.acpi0.nexus0.root0
acpi_timer0: <24-bit timer at 3.579545MHz> [tentative] port 0x808-0x80b on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> [attached!] port 0x808-0x80b on acpi0
cpu0.acpi0.nexus0.root0
cpu0: <ACPI CPU> [tentative] on acpi0
ACPI: SSDT @ 0x0x3f7ae450/0x0724 (v 1 PmRef Cpu0Cst 0x00003001 INTL 0x20051117)
ACPI: SSDT @ 0x0x3f7ae180/0x023C (v 1 PmRef Cpu0Ist 0x00003000 INTL 0x20051117)
cpu0: <ACPI CPU> [attached!] port 0x814 on acpi0
acpi_tz0.acpi0.nexus0.root0
acpi_tz0: <Thermal Zone> [tentative] on acpi0
acpi_tz0: <Thermal Zone> [attached!] on acpi0
acpi_lid0.acpi0.nexus0.root0
acpi_lid0: <Control Method Lid Switch> [tentative] on acpi0
acpi_lid0: <Control Method Lid Switch> [attached!] on acpi0
acpi_button0.acpi0.nexus0.root0
acpi_button0: <Sleep Button> [tentative] on acpi0
acpi_button0: <Sleep Button> [attached!] on acpi0
acpi_button1.acpi0.nexus0.root0
acpi_button1: <Power Button> [tentative] on acpi0
acpi_button1: <Power Button> [attached!] on acpi0
battery0.acpi0.nexus0.root0
battery0: <ACPI Control Method Battery> [tentative] on acpi0
battery0: <ACPI Control Method Battery> [attached!] on acpi0
acpi_acad0.acpi0.nexus0.root0
acpi_acad0: <AC Adapter> [tentative] on acpi0
acpi_acad0: <AC Adapter> [attached!] on acpi0
atkbdc0.acpi0.nexus0.root0
atkbdc0: <Keyboard controller (i8042)> [tentative] port 0x64,0x60 irq 1 on acpi0
atkbd0.atkbdc0.acpi0.nexus0.root0
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0065
battery0: battery initialization start
acpi_ec0: info: new max delay is 830 us
acpi_ec0: info: new max delay is 11000 us
acpi_ec0: info: new max delay is 61000 us
battery0: battery initialization done, tried 1 times
acpi_acad0: acline initialization start
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
psm0: failed to get data.
psm0.atkbdc0.acpi0.nexus0.root0
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:00, syncbits:00
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] port 0x64,0x60 irq 1 on acpi0
acpi0: <A_M_I_ OEMRSDT> [attached!] at irq 9 on motherboard
legacypci0.nexus0.root0
legacypci0 [tentative] on motherboard
pcib0.legacypci0.nexus0.root0
pcib0: <Host to PCI bridge> [tentative] on legacypci0
pci0.pcib0.legacypci0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: pci_attach() physical bus=0
found-> vendor=0x8086, dev=0x27ac, revid=0x03
bus=0, slot=0, func=0
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base f7f00000, size 19
map[14]: type 1, range 32, base 0000dc00, size 3
map[18]: type 1, range 32, base d0000000, size 28
map[1c]: type 1, range 32, base f7ec0000, size 18
found-> vendor=0x8086, dev=0x27ae, revid=0x03
bus=0, slot=2, func=0
class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=5
map[10]: type 1, range 32, base f7f80000, size 19
found-> vendor=0x8086, dev=0x27a6, revid=0x03
bus=0, slot=2, func=1
class=[DISPLAY]03-80-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[10]: type 1, range 64, base f7eb8000, size 14
found-> vendor=0x8086, dev=0x27d8, revid=0x02
bus=0, slot=27, func=0
class=[MULTIMEDIA]04-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
PCI Express ver.1 cap=0x0091
found-> vendor=0x8086, dev=0x27d0, revid=0x02
bus=0, slot=28, func=0
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=4 secondarybus=4
intpin=a, irq=5
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000060[HOTPLUG]
found-> vendor=0x8086, dev=0x27d2, revid=0x02
bus=0, slot=28, func=1
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=3 secondarybus=3
intpin=b, irq=10
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000060[HOTPLUG]
found-> vendor=0x8086, dev=0x27d6, revid=0x02
bus=0, slot=28, func=3
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=1
subordinatebus=2 secondarybus=1
intpin=d, irq=11
PCI Express ver.1 cap=0x0141[ROOT], slotcap=0x00000060[HOTPLUG]
map[20]: type 1, range 32, base 0000d400, size 5
found-> vendor=0x8086, dev=0x27c8, revid=0x02
bus=0, slot=29, func=0
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
intpin=a, irq=3
map[20]: type 1, range 32, base 0000d480, size 5
found-> vendor=0x8086, dev=0x27c9, revid=0x02
bus=0, slot=29, func=1
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=11
map[20]: type 1, range 32, base 0000d800, size 5
found-> vendor=0x8086, dev=0x27ca, revid=0x02
bus=0, slot=29, func=2
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=c, irq=7
map[20]: type 1, range 32, base 0000d880, size 5
found-> vendor=0x8086, dev=0x27cb, revid=0x02
bus=0, slot=29, func=3
class=[SERIALBUS]0c-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=d, irq=5
map[10]: type 1, range 32, base f7eb7c00, size 10
found-> vendor=0x8086, dev=0x27cc, revid=0x02
bus=0, slot=29, func=7
class=[SERIALBUS]0c-03-20, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=3
found-> vendor=0x8086, dev=0x2448, revid=0xe2
bus=0, slot=30, func=0
class=[BRIDGE]06-04-01, hdrtype=0x01, mfdev=0
subordinatebus=5 secondarybus=5
found-> vendor=0x8086, dev=0x27b9, revid=0x02
bus=0, slot=31, func=0
class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=1
subordinatebus=0 secondarybus=0
map[20]: type 1, range 32, base 0000ffa0, size 4
found-> vendor=0x8086, dev=0x27c4, revid=0x02
bus=0, slot=31, func=2
class=[STORAGE]01-01-80, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=b, irq=255
agp0.pci0.pcib0.legacypci0.nexus0.root0
agp0: <Intel 945GME SVGA controller> [tentative] port 0xdc00-0xdc07 mem 0xf7ec0000-0xf7efffff,0xd0000000-0xdfffffff,0xf7f00000-0xf7f7ffff irq 5 at device 2.0 on pci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
agp0: <Intel 945GME SVGA controller> [attached!] port 0xdc00-0xdc07 mem 0xf7ec0000-0xf7efffff,0xd0000000-0xdfffffff,0xf7f00000-0xf7f7ffff irq 5 at device 2.0 on pci0
pci0: <unknown card> (vendor=0x8086, dev=0x27a6) at 2.1
pci0: <unknown card> (vendor=0x8086, dev=0x27d8) at 27.0 irq 5
pcib1.pci0.pcib0.legacypci0.nexus0.root0
pcib1: <PCI to PCI bridge (vendor=8086 device=27d0)> [tentative] irq 5 at device 28.0 on pci0
pcib1: secondary bus 4
pcib1: subordinate bus 4
pcib1: I/O decode 0x0-0x0
pcib1: memory decode 0x0-0x0
pcib1: prefetched decode 0x0-0x0
pci4.pcib1.pci0.pcib0.legacypci0.nexus0.root0
pci4: <PCI bus> [tentative] on pcib1
pci4: pci_attach() physical bus=4
pci4: <PCI bus> [attached!] on pcib1
pcib1: <PCI to PCI bridge (vendor=8086 device=27d0)> [attached!] irq 5 at device 28.0 on pci0
pcib2.pci0.pcib0.legacypci0.nexus0.root0
pcib2: <PCI to PCI bridge (vendor=8086 device=27d2)> [tentative] irq 10 at device 28.1 on pci0
pcib2: secondary bus 3
pcib2: subordinate bus 3
pcib2: I/O decode 0xe000-0xefff
pcib2: memory decode 0xfbf00000-0xfbffffff
pcib2: prefetched decode 0xfff00000-0xfffff
pci3.pcib2.pci0.pcib0.legacypci0.nexus0.root0
pci3: <PCI bus> [tentative] on pcib2
pci3: pci_attach() physical bus=3
map[10]: type 1, range 64, base fbfc0000, size 18
map[18]: type 1, range 32, base 0000ec00, size 7
found-> vendor=0x1969, dev=0x1026, revid=0xb0
bus=3, slot=0, func=0
class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
PCI Express ver.1 cap=0x0001[DEVICE]
pci3: <unknown card> (vendor=0x1969, dev=0x1026) at 0.0 irq 10
pci3: <PCI bus> [attached!] on pcib2
pcib2: <PCI to PCI bridge (vendor=8086 device=27d2)> [attached!] irq 10 at device 28.1 on pci0
pcib3.pci0.pcib0.legacypci0.nexus0.root0
pcib3: <PCI to PCI bridge (vendor=8086 device=27d6)> [tentative] irq 11 at device 28.3 on pci0
pcib3: secondary bus 1
pcib3: subordinate bus 2
pcib3: I/O decode 0x0-0x0
pcib3: memory decode 0xf8000000-0xfbefffff
pcib3: prefetched decode 0xf0000000-0xf6ffffff
pci1.pcib3.pci0.pcib0.legacypci0.nexus0.root0
pci1: <PCI bus> [tentative] on pcib3
pci1: pci_attach() physical bus=1
map[10]: type 1, range 32, base fbef0000, size 16
found-> vendor=0x1814, dev=0x0781, revid=0x00
bus=1, slot=0, func=0
class=[NETWORK]02-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=11
PCI Express ver.1 cap=0x0001[DEVICE]
pci1: <unknown card> (vendor=0x1814, dev=0x0781) at 0.0 irq 11
pci1: <PCI bus> [attached!] on pcib3
pcib3: <PCI to PCI bridge (vendor=8086 device=27d6)> [attached!] irq 11 at device 28.3 on pci0
uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhci0: <UHCI (generic) USB controller> [tentative] port 0xd400-0xd41f irq 3 at device 29.0 on pci0
usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
usb0: <UHCI (generic) USB controller> [tentative] on uhci0
usb0: USB revision 1.0
uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb0
uhub0: 2 ports with 2 removable, self powered
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb0
usb0: <UHCI (generic) USB controller> [attached!] on uhci0
uhci0: <UHCI (generic) USB controller> [attached!] port 0xd400-0xd41f irq 3 at device 29.0 on pci0
uhci1.pci0.pcib0.legacypci0.nexus0.root0
uhci1: <UHCI (generic) USB controller> [tentative] port 0xd480-0xd49f irq 11 at device 29.1 on pci0
usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
usb1: <UHCI (generic) USB controller> [tentative] on uhci1
usb1: USB revision 1.0
uhub1.usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb1
uhub1: 2 ports with 2 removable, self powered
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb1
usb1: <UHCI (generic) USB controller> [attached!] on uhci1
uhci1: <UHCI (generic) USB controller> [attached!] port 0xd480-0xd49f irq 11 at device 29.1 on pci0
uhci2.pci0.pcib0.legacypci0.nexus0.root0
uhci2: <UHCI (generic) USB controller> [tentative] port 0xd800-0xd81f irq 7 at device 29.2 on pci0
usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
usb2: <UHCI (generic) USB controller> [tentative] on uhci2
usb2: USB revision 1.0
uhub2.usb2.uhci2.pci0.pcib0.legacypci0.nexus0.root0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb2
uhub2: 2 ports with 2 removable, self powered
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb2
usb2: <UHCI (generic) USB controller> [attached!] on uhci2
uhci2: <UHCI (generic) USB controller> [attached!] port 0xd800-0xd81f irq 7 at device 29.2 on pci0
uhci3.pci0.pcib0.legacypci0.nexus0.root0
uhci3: <UHCI (generic) USB controller> [tentative] port 0xd880-0xd89f irq 5 at device 29.3 on pci0
usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
usb3: <UHCI (generic) USB controller> [tentative] on uhci3
usb3: USB revision 1.0
uhub3.usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [tentative] on usb3
uhub3: 2 ports with 2 removable, self powered
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> [attached!] on usb3
usb3: <UHCI (generic) USB controller> [attached!] on uhci3
uhci3: <UHCI (generic) USB controller> [attached!] port 0xd880-0xd89f irq 5 at device 29.3 on pci0
pci0: <USB controller> (vendor=0x8086, dev=0x27cc) at 29.7 irq 3
pcib4.pci0.pcib0.legacypci0.nexus0.root0
pcib4: <PCI to PCI bridge (vendor=8086 device=2448)> [tentative] at device 30.0 on pci0
pcib4: secondary bus 5
pcib4: subordinate bus 5
pcib4: I/O decode 0x0-0x0
pcib4: memory decode 0x0-0x0
pcib4: prefetched decode 0x0-0x0
pcib4: Subtractively decoded bridge.
pci5.pcib4.pci0.pcib0.legacypci0.nexus0.root0
pci5: <PCI bus> [tentative] on pcib4
pci5: pci_attach() physical bus=5
pci5: <PCI bus> [attached!] on pcib4
pcib4: <PCI to PCI bridge (vendor=8086 device=2448)> [attached!] at device 30.0 on pci0
isab0.pci0.pcib0.legacypci0.nexus0.root0
isab0: <PCI to ISA bridge (vendor=8086 device=27b9)> [tentative] at device 31.0 on pci0
isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
isa0: <ISA bus> [tentative] on isab0
isa0: <ISA bus> [attached!] on isab0
isab0: <PCI to ISA bridge (vendor=8086 device=27b9)> [attached!] at device 31.0 on pci0
atapci0.pci0.pcib0.legacypci0.nexus0.root0
atapci0: <Intel ICH7M SATA300 controller> [tentative] port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0
ata0.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata0: <ATA channel 0> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci0: reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ugen0.uhub3.usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
ugen0: <Broadcom Corp BT-253, class 224/1, rev 2.00/2.41, addr 2> [tentative] on uhub3
umass0.uhub0.usb0.uhci0.pci0.pcib0.legacypci0.nexus0.root0
umass0: <vendor 0x0402 USB 2.0 Storage Device, class 0/0, rev 2.00/1.03, addr 2> [tentative] on uhub0
umass0:0:0:-1: Attached to scbus0
umass0: <vendor 0x0402 USB 2.0 Storage Device, class 0/0, rev 2.00/1.03, addr 2> [attached!] on uhub0
ugen0: <Broadcom Corp BT-253, class 224/1, rev 2.00/2.41, addr 2> [attached!] on uhub3
ugen1.uhub3.usb3.uhci3.pci0.pcib0.legacypci0.nexus0.root0
ugen1: <Chicony Electronics Co., Ltd. CNF7129, class 239/2, rev 2.00/15.44, addr 3> [tentative] on uhub3
ugen1: <Chicony Electronics Co., Ltd. CNF7129, class 239/2, rev 2.00/15.44, addr 3> [attached!] on uhub3
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0: stat0=0x50 err=0x01 lsb=0x00 msb=0x00
ata0: stat1=0x00 err=0x01 lsb=0x00 msb=0x00
ata0: reset tp2 stat0=50 stat1=00 devices=0x1<ATA_MASTER>
ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad0: Intel check1 failed
ad0: Adaptec check1 failed
ad0: LSI (v3) check1 failed
ad0: LSI (v2) check1 failed
ad0: FreeBSD check1 failed
ad0: 152627MB <Seagate ST9160827AS 3.AAA> at ata0-master SATA150
ad0: 312581808 sectors [310101C/16H/63S] 16 sectors/interrupt 1 depth queue
ata0: <ATA channel 0> [attached!] on atapci0
ata1.atapci0.pci0.pcib0.legacypci0.nexus0.root0
ata1: <ATA channel 1> [tentative] on atapci0
atapci0: reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci0: reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=00 ostat1=00
ata1: stat0=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: stat1=0x0f err=0x0f lsb=0x0f msb=0x0f
ata1: stat1=0x57 err=0x57 lsb=0x57 msb=0x57
ata1: stat1=0x00 err=0x00 lsb=0x00 msb=0x00
ata1: reset tp2 stat0=00 stat1=00 devices=0x0
ata1: <ATA channel 1> [attached!] on atapci0
atapci0: <Intel ICH7M SATA300 controller> [attached!] port 0xffa0-0xffaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.2 on pci0
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] on legacypci0
legacypci0 [attached!] on motherboard
ex_isa_identify()
atkbdc-: atkbdc0 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
pmtimer0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 [tentative] failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
adv0 [tentative] failed to probe on isa0
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x330
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x334
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x230
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x234
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x130
bt0: Failed Status Reg Test - ff
bt_isa_probe: Probe failed at 0x134
bt0 [tentative] failed to probe at port 0x134-0x137 on isa0
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0: status reg test failed ff
aha0 [tentative] failed to probe at port 0x134-0x137 on isa0
aic0 [tentative] failed to probe at port 0x140-0x15f on isa0
atkbdc1: <Keyboard controller (i8042)> [tentative] failed to probe at port 0x60 on isa0
vga0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0.isab0.pci0.pcib0.legacypci0.nexus0.root0
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
lm0 [tentative] failed to probe at port 0x290-0x297 on isa0
it0 [tentative] failed to probe at port 0x290-0x297 on isa0
it1 [tentative] failed to probe at port 0xc00-0xc07 on isa0
it2 [tentative] failed to probe at port 0xd00-0xd07 on isa0
sio0: can't drain, serial port might not exist, disabling
sio0 [tentative] failed to probe at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio1: can't drain, serial port might not exist, disabling
sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> [tentative] failed to probe at irq 7 on isa0
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
cs0: not probed (disabled)
sn0: not probed (disabled)
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03ff7f3f 0..1023=1024 cylinders, 0..127=128 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
lo0: bpf attached
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
ppp0: bpf attached
sl0: bpf attached
faith0: bpf attached
(probe0:umass-sim0:0:0:0): error 22
(probe0:umass-sim0:0:0:0): Unretryable Error
pass0 at umass-sim0 bus 0 target 0 lun 0
pass0: <HL-DT-ST DVDRAM GSA-4160B A301> Removable CD-ROM SCSI-0 device
pass0: 1.000MB/s transfers
bootdev: a0000075 type=117 unit=0 slice=0 part=0 major=-1
ATA PseudoRAID loaded
Mounting root from cd9660:cd0c
cd0 at umass-sim0 bus 0 target 0 lun 0
cd0: <HL-DT-ST DVDRAM GSA-4160B A301> Removable CD-ROM SCSI-0 device
cd0: 1.000MB/s transfers
cd0: cd present [156466 x 2048 byte records]
cd0: invalid primary partition table: no magic
iso_mountroot(): using session at block 0
cd0: invalid primary partition table: no magic
start_init: trying /sbin/init
acpi_ec0: info: new max delay is 71000 us
system power profile changed to 'economy'
acpi_acad0: Off Line
system power profile changed to 'performance'
acpi_acad0: On Line
umass1.uhub1.usb1.uhci1.pci0.pcib0.legacypci0.nexus0.root0
umass1: <SanDisk Corporation Cruzer Micro, class 0/0, rev 2.00/0.20, addr 2> [tentative] on uhub1
umass1:3:1:-1: Attached to scbus3
umass1: <SanDisk Corporation Cruzer Micro, class 0/0, rev 2.00/0.20, addr 2> [attached!] on uhub1
pass1 at umass-sim1 bus 1 target 0 lun 0
pass1: <SanDisk Cruzer Micro 0.2> Removable Direct Access SCSI-2 device
pass1: 1.000MB/s transfers
da0 at umass-sim1 bus 1 target 0 lun 0
da0: <SanDisk Cruzer Micro 0.2> Removable Direct Access SCSI-2 device
da0: 1.000MB/s transfers
da0: 488MB (1000944 512 byte sectors: 64H 32S/T 488C)
da0s1: type 0xb, start 63, end = 1000943, size 1000881
da0s1: C/H/S end 61/254/63 (996029) != end 1000943: invalid
- Follow-Ups:
- Re: ASUS Eee PC 1000H (age(4))
- From: Christopher Rawnsley <rawprawns@gmail.com>
- Re: ASUS Eee PC 1000H (age(4))
[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index][Thread Index]