DragonFly users List (threaded) for 2005-07
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]
Re: Problems with Soyo P4VTE Board
* Carl Schmidt <carl@xxxxxxxxxxxxxxx> [2005-07-02 10:05:39 -0400]:
> (blah blah blah)
I'm sorry, I did not attach a dmesg output like I wanted to.
This is from FreeBSD 5.4-RELEASE (also attached pciconf -lv).
--
Carl
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0: Sun May 8 10:21:06 UTC 2005
root@xxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0a36000.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0a36244.
Table 'FACP' at 0x1fff0030
Table 'APIC' at 0x1fff00c0
MADT: Found table at 0x1fff00c0
APIC: Using the MADT enumerator.
MADT: Found CPU APIC ID 0 ACPI ID 1: enabled
MADT: Found CPU APIC ID 1 ACPI ID 2: disabled
ACPI APIC Table: <AMIINT VIA_P6 >
Calibrating clock(s) ... i8254 clock: 1193188 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 2405470492 Hz
CPU: Intel(R) Celeron(R) CPU 2.40GHz (2405.47-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 536805376 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009efff, 647168 bytes (158 pages)
0x0000000000100000 - 0x00000000003fffff, 3145728 bytes (768 pages)
0x0000000000c25000 - 0x000000001f6bffff, 514437120 bytes (125595 pages)
avail memory = 515633152 (491 MB)
bios32: Found BIOS32 Service Directory header at 0xc00fda80
bios32: Entry = 0xfda90 (c00fda90) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xdab1
pnpbios: Found PnP BIOS data at 0xc00f7190
pnpbios: Entry = f0000:5d1b Rev = 1.0
Other BIOS signatures found:
APIC: CPU 0 has ACPI ID 1
MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec00000
ioapic0: Changing APIC ID to 2
ioapic0: Routing external 8259A's -> intpin 0
ioapic0: intpin 0 -> ExtINT (edge, high)
ioapic0: intpin 1 -> ISA IRQ 1 (edge, high)
ioapic0: intpin 2 -> ISA IRQ 2 (edge, high)
ioapic0: intpin 3 -> ISA IRQ 3 (edge, high)
ioapic0: intpin 4 -> ISA IRQ 4 (edge, high)
ioapic0: intpin 5 -> ISA IRQ 5 (edge, high)
ioapic0: intpin 6 -> ISA IRQ 6 (edge, high)
ioapic0: intpin 7 -> ISA IRQ 7 (edge, high)
ioapic0: intpin 8 -> ISA IRQ 8 (edge, high)
ioapic0: intpin 9 -> ISA IRQ 9 (edge, high)
ioapic0: intpin 10 -> ISA IRQ 10 (edge, high)
ioapic0: intpin 11 -> ISA IRQ 11 (edge, high)
ioapic0: intpin 12 -> ISA IRQ 12 (edge, high)
ioapic0: intpin 13 -> ISA IRQ 13 (edge, high)
ioapic0: intpin 14 -> ISA IRQ 14 (edge, high)
ioapic0: intpin 15 -> ISA IRQ 15 (edge, high)
ioapic0: intpin 16 -> PCI IRQ 16 (level, low)
ioapic0: intpin 17 -> PCI IRQ 17 (level, low)
ioapic0: intpin 18 -> PCI IRQ 18 (level, low)
ioapic0: intpin 19 -> PCI IRQ 19 (level, low)
ioapic0: intpin 20 -> PCI IRQ 20 (level, low)
ioapic0: intpin 21 -> PCI IRQ 21 (level, low)
ioapic0: intpin 22 -> PCI IRQ 22 (level, low)
ioapic0: intpin 23 -> PCI IRQ 23 (level, low)
MADT: Interrupt override: source 0, irq 2
ioapic0: Routing IRQ 0 -> intpin 2
ioapic0: intpin 2 trigger: edge
ioapic0: intpin 2 polarity: high
MADT: Interrupt override: source 9, irq 9
ioapic0: intpin 9 trigger: level
ioapic0: intpin 9 polarity: low
ioapic0 <Version 0.3> irqs 0-23 on motherboard
cpu0 BSP:
ID: 0x00000000 VER: 0x00050014 LDR: 0x01000000 DFR: 0x0fffffff
lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
wlan: <802.11 Link Layer>
random: <entropy source, Software, Yarrow>
io: <I/O>
mem: <memory>
Pentium Pro MTRR support enabled
null: <null device, zero device>
npx0: [FAST]
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <AMIINT VIA_P6> on motherboard
acpi0: [MPSAFE]
pci_open(1): mode 1 addr port (0x0cf8) is 0x80010014
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=31681106)
pcibios: BIOS version 2.10
Found $PIR table, 10 entries at 0xc00f7840
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 1 B 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 17 C 0x03 3 4 5 6 7 10 11 12 14 15
slot 1 0 8 A 0x01 3 4 5 6 7 10 11 12 14 15
slot 1 0 8 B 0x02 3 4 5 6 7 10 11 12 14 15
slot 1 0 8 C 0x03 3 4 5 6 7 10 11 12 14 15
slot 1 0 8 D 0x05 3 4 5 6 7 10 11 12 14 15
slot 2 0 9 A 0x02 3 4 5 6 7 10 11 12 14 15
slot 2 0 9 B 0x03 3 4 5 6 7 10 11 12 14 15
slot 2 0 9 C 0x05 3 4 5 6 7 10 11 12 14 15
slot 2 0 9 D 0x01 3 4 5 6 7 10 11 12 14 15
slot 3 0 10 A 0x03 3 4 5 6 7 10 11 12 14 15
slot 3 0 10 B 0x05 3 4 5 6 7 10 11 12 14 15
slot 3 0 10 C 0x01 3 4 5 6 7 10 11 12 14 15
slot 3 0 10 D 0x02 3 4 5 6 7 10 11 12 14 15
slot 4 0 11 A 0x05 3 4 5 6 7 10 11 12 14 15
slot 4 0 11 B 0x01 3 4 5 6 7 10 11 12 14 15
slot 4 0 11 C 0x02 3 4 5 6 7 10 11 12 14 15
slot 4 0 11 D 0x03 3 4 5 6 7 10 11 12 14 15
slot 5 0 12 A 0x05 3 4 5 6 7 10 11 12 14 15
slot 5 0 12 B 0x01 3 4 5 6 7 10 11 12 14 15
slot 5 0 12 C 0x02 3 4 5 6 7 10 11 12 14 15
slot 5 0 12 D 0x03 3 4 5 6 7 10 11 12 14 15
embedded 0 16 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 16 B 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 16 C 0x03 3 4 5 6 7 10 11 12 14 15
embedded 0 16 D 0x05 3 4 5 6 7 10 11 12 14 15
embedded 0 18 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 15 A 0x01 3 4 5 6 7 10 11 12 14 15
embedded 0 15 B 0x02 3 4 5 6 7 10 11 12 14 15
embedded 0 15 C 0x03 3 4 5 6 7 10 11 12 14 15
embedded 0 15 D 0x05 3 4 5 6 7 10 11 12 14 15
AcpiOsDerivePciId: bus 0 dev 17 func 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
AcpiOsDerivePciId: bus 0 dev 17 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 0
ACPI timer: 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 1/1 -> 10
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
cpu0: <ACPI CPU> on acpi0
acpi_throttle0: <ACPI CPU Throttling> on cpu0
acpi_throttle0: P_CNT from P_BLK 0x810
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
ACPI PCI link initial configuration:
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e0000000, size 26, enabled
found-> vendor=0x1106, dev=0x3168, revid=0x82
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0006, statreg=0x2230, cachelnsz=0 (dwords)
lattimer=0x08 (240 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0xb198, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0107, statreg=0x0230, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x0f (3750 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000ec00, size 3, enabled
map[14]: type 4, range 32, base 0000e800, size 2, enabled
map[18]: type 4, range 32, base 0000e400, size 3, enabled
map[1c]: type 4, range 32, base 0000e000, size 2, enabled
map[20]: type 4, range 32, base 0000dc00, size 4, enabled
map[24]: type 4, range 32, base 0000d800, size 8, enabled
pcib0: matched entry for 0.15.INTB
pcib0: slot 15 INTB hardwired to IRQ 20
found-> vendor=0x1106, dev=0x3149, revid=0x80
bus=0, slot=15, func=0
class=01-04-00, hdrtype=0x00, mfdev=1
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=b, irq=20
powerspec 2 supports D0 D3 current D0
map[20]: type 4, range 32, base 0000fc00, size 4, enabled
found-> vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=15, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=a, irq=255
powerspec 2 supports D0 D3 current D0
found-> vendor=0x1106, dev=0x3227, revid=0x00
bus=0, slot=17, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0087, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 2 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000d400, size 8, enabled
pcib0: matched entry for 0.17.INTC
pcib0: slot 17 INTC hardwired to IRQ 22
found-> vendor=0x1106, dev=0x3059, revid=0x60
bus=0, slot=17, func=5
class=04-01-00, hdrtype=0x00, mfdev=0
cmdreg=0x0001, statreg=0x0210, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=c, irq=22
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 4, range 32, base 0000d000, size 8, enabled
map[14]: type 1, range 32, base dfffbe00, size 8, enabled
pcib0: matched entry for 0.18.INTA
pcib0: slot 18 INTA hardwired to IRQ 23
found-> vendor=0x1106, dev=0x3065, revid=0x78
bus=0, slot=18, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x03 (750 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=23
powerspec 2 supports D0 D1 D2 D3 current D0
agp0: <VIA 8754 (PT800) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0
agp0: Reserved 0x4000000 bytes for rid 0x10 type 3 at 0xe0000000
agp0: allocating GATT for aperture of size 240M
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xa000-0xafff
pcib1: memory decode 0xdfe00000-0xdfefffff
pcib1: prefetched decode 0xcfd00000-0xdfcfffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 3, range 32, base d0000000, size 27, enabled
pcib1: device (null) requested decoded memory range 0xd0000000-0xd7ffffff
map[14]: type 4, range 32, base 0000a800, size 8, enabled
pcib1: device (null) requested decoded I/O range 0xa800-0xa8ff
map[18]: type 1, range 32, base dfef0000, size 16, enabled
pcib1: device (null) requested decoded memory range 0xdfef0000-0xdfefffff
pcib0: matched entry for 0.1.INTA
pcib0: slot 1 INTA hardwired to IRQ 16
pcib1: slot 0 INTA is routed to irq 16
found-> vendor=0x1002, dev=0x5159, revid=0x00
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0087, statreg=0x02b0, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x00 (0 ns)
intpin=a, irq=16
powerspec 2 supports D0 D1 D2 D3 current D0
pci1: <display, VGA> at device 0.0 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0xd800-0xd8ff,0xdc00-0xdc0f,0xe000-0xe003,0xe400-0xe407,0xe800-0xe803,0xec00-0xec07 irq 20 at device 15.0 on pci0
atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xdc00
atapci0: [MPSAFE]
ata2: channel #0 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xec00
atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xe800
ata2: reset tp1 mask=03 ostat0=50 ostat1=7f
ata2-master: stat=0x50 err=0x01 lsb=0x00 msb=0x00
ata2-slave: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-slave: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-slave: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-slave: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-slave: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-slave: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-slave: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2-slave: stat=0x7f err=0xff lsb=0xff msb=0xff
ata2: reset tp2 stat0=50 stat1=ff devices=0x1<ATA_MASTER>
ata2: [MPSAFE]
ata3: channel #1 on atapci0
atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xe400
atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xe000
ata3: reset tp1 mask=03 ostat0=7f ostat1=7f
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-master: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3-slave: stat=0x7f err=0xff lsb=0xff msb=0xff
ata3: reset tp2 stat0=ff stat1=ff devices=0x0
ata3: [MPSAFE]
atapci1: <VIA 8237 UDMA133 controller> port 0xfc00-0xfc0f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 15.1 on pci0
atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xfc00
ata0: channel #0 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0x1f0
atapci1: Reserved 0x1 bytes for rid 0x14 type 4 at 0x3f6
ata0: reset tp1 mask=03 ostat0=50 ostat1=00
ata0-master: stat=0x10 err=0x01 lsb=0x14 msb=0xeb
ata0-slave: stat=0x00 err=0x01 lsb=0x7f msb=0x7f
ata0: reset tp2 stat0=10 stat1=00 devices=0x4<ATAPI_MASTER>
ata0: [MPSAFE]
ata1: channel #1 on atapci1
atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0x170
atapci1: Reserved 0x1 bytes for rid 0x1c type 4 at 0x376
ata1: reset tp1 mask=03 ostat0=20 ostat1=30
ata1-master: stat=0x20 err=0x20 lsb=0x20 msb=0x20
ata1-slave: stat=0x30 err=0x30 lsb=0x30 msb=0x30
ata1: reset tp2 stat0=20 stat1=30 devices=0x0
ata1: [MPSAFE]
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xd000-0xd0ff mem 0xdfffbe00-0xdfffbeff irq 23 at device 18.0 on pci0
vr0: Reserved 0x100 bytes for rid 0x10 type 4 at 0xd000
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0: OUI 0x004063, model 0x0032, rev. 8
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: bpf attached
vr0: Ethernet address: 00:50:2c:a4:a8:da
vr0: [MPSAFE]
acpi_button1: <Sleep Button> on acpi0
fdc0: <floppy drive controller> port 0x3f7,0x3f4-0x3f5,0x3f2-0x3f3 irq 6 drq 2 on acpi0
fdc0: ic_type 90 part_id 80
fdc0: [MPSAFE]
fdc0: [FAST]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: irq maps: 0x4041 0x4041 0x4041 0x4041
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
psmcpnp0: <PS/2 mouse port> irq 12 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x0, flags:0x3d0000
atkbd0: [GIANT-LOCKED]
psm0: current command byte:0065
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000008, packet size:4
psm0: syncmask:08, syncbits:00
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
unknown: status reg test failed ff
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
ahc_isa_probe 13: ioport 0xdc00 alloc failed
ahc_isa_probe 14: ioport 0xec00 alloc failed
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <ISA Option ROMs> at iomem 0xd1800-0xd57ff,0xc0000-0xccfff on isa0
pmtimer0 on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0: parallel port not found.
ppc0: <Parallel port> failed to probe at irq 7 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
sio1: irq maps: 0x4041 0x4041 0x4041 0x4041
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 2405470492 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
ata0-master: pio=0x0c wdma=0x22 udma=0x44 cable=80pin
ata0-master: setting PIO4 on VIA 8237 chip
acd0: <Pioneer DVD-ROM ATAPIModel DVD-120S/1.01> DVDROM drive at ata0 as master
acd0: read 6875KB/s (6875KB/s), 256KB buffer, PIO4
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, packet
acd0: Writes:
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata2-master: pio=0x0c wdma=0x22 udma=0x46 cable=40pin
ad4: <Maxtor 6Y120M0/YAR51EW0> ATA-7 disk at ata2-master
ad4: 117246MB (240121728 sectors), 238216 C, 16 H, 63 S, 512 B
ad4: 16 secs/int, 1 depth queue, SATA150
ar: FreeBSD check1 failed
ioapic0: routing intpin 1 (ISA IRQ 1) to cluster 0
ioapic0: routing intpin 4 (ISA IRQ 4) to cluster 0
ioapic0: routing intpin 6 (ISA IRQ 6) to cluster 0
ioapic0: routing intpin 8 (ISA IRQ 8) to cluster 0
ioapic0: routing intpin 9 (ISA IRQ 9) to cluster 0
ioapic0: routing intpin 12 (ISA IRQ 12) to cluster 0
ioapic0: routing intpin 13 (ISA IRQ 13) to cluster 0
ioapic0: routing intpin 14 (ISA IRQ 14) to cluster 0
ioapic0: routing intpin 15 (ISA IRQ 15) to cluster 0
ioapic0: routing intpin 20 (PCI IRQ 20) to cluster 0
ioapic0: routing intpin 23 (PCI IRQ 23) to cluster 0
GEOM: new disk ad4
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/254/63 s:63 l:120037617
[1] f:80 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:120037680 l:58717575
[2] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/254/63 s:178755255 l:61352235
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad4s1, start 32256 length 61459259904 end 61459292159
GEOM: Configure ad4s2, start 61459292160 length 30063398400 end 91522690559
GEOM: Configure ad4s3, start 91522690560 length 31412344320 end 122935034879
[0] f:63 typ:114 s(CHS):368/111/45 e(CHS):371/101/51 s:218129509 l:1701990410
[1] f:73 typ:116 s(CHS):67/115/32 e(CHS):299/114/44 s:729050177 l:543974724
[2] f:74 typ:101 s(CHS):114/111/32 e(CHS):353/115/52 s:168653938 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:-1602027520 l:51635
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad4s2a, start 0 length 268435456 end 268435455
GEOM: Configure ad4s2b, start 268435456 length 1073741824 end 1342177279
GEOM: Configure ad4s2c, start 0 length 30063398400 end 30063398399
GEOM: Configure ad4s2d, start 1342177280 length 536870912 end 1879048191
GEOM: Configure ad4s2e, start 1879048192 length 10737418240 end 12616466431
GEOM: Configure ad4s2f, start 12616466432 length 1073741824 end 13690208255
GEOM: Configure ad4s2g, start 13690208256 length 16373190144 end 30063398399
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
GEOM: Configure ad4s3c, start 0 length 31412344320 end 31412344319
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
[0] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[1] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:80 typ:165 s(CHS):0/0/1 e(CHS):1023/254/63 s:0 l:50000
Mounting root from ufs:/dev/ad4s2a
start_init: trying /sbin/init
Accounting enabled
splash: image decoder found: star_saver
agp0@pci0:0:0: class=0x060000 card=0x00001106 chip=0x31681106 rev=0x82 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8374 P4X400 Host Controller/AGP Bridge'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000080 chip=0xb1981106 rev=0x00 hdr=0x01
vendor = 'VIA Technologies Inc'
device = 'ProSavageDDR P4X600 CPU to AGP Bridge'
class = bridge
subclass = PCI-PCI
atapci0@pci0:15:0: class=0x010400 card=0x31491106 chip=0x31491106 rev=0x80 hdr=0x00
vendor = 'VIA Technologies Inc'
device = '??? SATA RAID Controller'
class = mass storage
subclass = RAID
atapci1@pci0:15:1: class=0x01018a card=0x05711106 chip=0x05711106 rev=0x06 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT82xxxx EIDE Controller (All VIA Chipsets)'
class = mass storage
subclass = ATA
isab0@pci0:17:0: class=0x060100 card=0x00001106 chip=0x32271106 rev=0x00 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8237 PCI-to-ISA Bridge'
class = bridge
subclass = PCI-ISA
none0@pci0:17:5: class=0x040100 card=0xa1011019 chip=0x30591106 rev=0x60 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT8233/33A/8235/8237 AC97 Enhanced Audio Controller'
class = multimedia
subclass = audio
vr0@pci0:18:0: class=0x020000 card=0x01021106 chip=0x30651106 rev=0x78 hdr=0x00
vendor = 'VIA Technologies Inc'
device = 'VT6102 Rhine II PCI Fast Ethernet Controller'
class = network
subclass = ethernet
none1@pci1:0:0: class=0x030000 card=0x2081148c chip=0x51591002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies Inc.'
device = 'RV100 Radeon 7000 / Radeon VE'
class = display
subclass = VGA
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]
