Re: SATA problems

[Bill Hacker <wbh@xxxxxxxxxxxxx>]

Danial Thom wrote:

> --- Joerg Sonnenberger <joerg@xxxxxxxxxxxxxxxxx>
> wrote:
>
> > On Tue, Apr 12, 2005 at 06:28:25PM -0700,
> > Danial Thom wrote:
> >
> > > I have a Tyan K8SR opteron MB with a SIL 3114
> > > SATA controller and I can't get it to work
> >
> > with
> >
> > > dragonflyBSD. When booting (and using an IDE
> >
> > disk
> >
> > > as the primary), I get
> > >
> > > ad4: timeout waiting for interrupt
> >
> > Can you post the full (verbose) dmesg please?
> >
> > Joerg
>
> Its difficult since the box won't boot (and
> doesn't save the dmesg) with an SATA in the
> system. Do you have any suggestions as to how to
> get the messages?
>
> Danial

Understand you have a non-SATA IDE drive as primary,
presume the DragonFlyBSD OS is on that?

If so, or comparison:

- First try to capture a dmesg from the installer CD with all HDD 
disconnected.

- Then try to capture a verbose dmesg with no SATA, PATA (IDE)  - and 
boot CD - only.

- If that boots OK, then disable the PATA IDE, enable the SATA,
attempt an install of DragonFlyBSD to the SATA, and capture that dmesg 
for comparison.

In either case the dmesg should be appearing on the COM1 serial port.

After a 'normal' boot, the latest will be in /var/run/dmesg.boot - even 
if a CD boot (in RAM).

HTH,

Bill Hacker