ste.4 and vpo.4 syncs

[Christian Brueffer <chris@xxxxxxxxxxxxx>]

This syncs ste.4 and vpo.4 with the versions in FreeBSD 4-STABLE.

- Christian

-- 
Christian Brueffer	chris@xxxxxxxxxxxxx	brueffer@xxxxxxxxxxx
GPG Key:	 http://people.freebsd.org/~brueffer/brueffer.key.asc
GPG Fingerprint: A5C8 2099 19FF AACA F41B  B29B 6C76 178C A0ED 982D

Index: ste.4
===================================================================
RCS file: /usr/home/ncvs/dragonfly/src/share/man/man4/ste.4,v
retrieving revision 1.2
diff -u -r1.2 ste.4
--- ste.4	17 Jun 2003 04:36:59 -0000	1.2
+++ ste.4	26 Jan 2004 23:08:12 -0000
@@ -28,7 +28,7 @@
 .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
 .\" THE POSSIBILITY OF SUCH DAMAGE.
 .\"
-.\" $FreeBSD: src/share/man/man4/ste.4,v 1.7.2.5 2003/02/17 21:20:39 trhodes Exp $
+.\" $FreeBSD: src/share/man/man4/ste.4,v 1.7.2.6 2004/01/04 11:04:43 brueffer Exp $
 .\" $DragonFly: src/share/man/man4/ste.4,v 1.2 2003/06/17 04:36:59 dillon Exp $
 .\"
 .Dd August 21, 1999
@@ -55,8 +55,7 @@
 layout is different.
 The ST201 has a 64-bit multicast hash filter
 and a single perfect filter entry for the station address.
-IT
-supports both 10 and 100Mbps speeds in either full or half duplex
+It supports both 10 and 100Mbps speeds in either full or half duplex
 using an MII transceiver.
 .Pp
 The
@@ -69,7 +68,7 @@
 The user can manually override
 the autoselected mode by adding media options to the
 .Pa /etc/rc.conf
-fine.
+file.
 .It 10baseT/UTP
 Set 10Mbps operation.
 The
@@ -132,7 +131,7 @@
 enough to return the driver to a fully operational condition.
 If
 you see this message at boot time and the driver fails to attach
-the device as a network interface, you will have to perform second
+the device as a network interface, you will have to perform a second
 warm boot to have the device properly configured.
 .Pp
 Note that this condition only occurs when warm booting from another

Index: vpo.4
===================================================================
RCS file: /usr/home/ncvs/dragonfly/src/share/man/man4/vpo.4,v
retrieving revision 1.2
diff -u -r1.2 vpo.4
--- vpo.4	17 Jun 2003 04:36:59 -0000	1.2
+++ vpo.4	28 Jan 2004 02:23:45 -0000
@@ -22,7 +22,7 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.\" $FreeBSD: src/share/man/man4/vpo.4,v 1.9.2.3 2001/08/17 13:08:40 ru Exp $
+.\" $FreeBSD: src/share/man/man4/vpo.4,v 1.9.2.4 2004/01/01 15:29:05 brueffer Exp $
 .\" $DragonFly: src/share/man/man4/vpo.4,v 1.2 2003/06/17 04:36:59 dillon Exp $
 .\"
 .Dd March 5, 1998
@@ -38,7 +38,7 @@
 .Cd "device scbus0 at vpo0"
 .Sh DESCRIPTION
 The primary purpose of the
-.Em vpo
+.Nm
 driver is to provide access to the Adaptec AIC-7110 SCSI controller built
 in the Iomega ZIP drive.
 But it should also work with the Iomega Jaz Traveller
@@ -83,7 +83,7 @@
 .Xr ppc 4 ,
 .Xr scsi 4
 .Sh BUGS
-During boot, the driver firstly try to detect a classic ZIP, then a ZIP+.
+During boot, the driver first tries to detect a classic ZIP, then a ZIP+.
 The ZIP+ detection is intrusive and may send errorneous charaters to your
 printer if the drive is not connected to your parallel port.
 .Sh HISTORY

Attachment: pgp00022.pgp
Description: PGP signature