DragonFly kernel List (threaded) for 2007-06
DragonFly BSD
DragonFly kernel List (threaded) for 2007-06
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: Decision time.... should NATA become the default for this release?


From: "Sepherosa Ziehau" <sepherosa@xxxxxxxxx>
Date: Sat, 2 Jun 2007 09:47:58 +0800

On 6/2/07, Matthew Dillon <dillon@apollo.backplane.com> wrote:
    I still want all the dmesg output for both NATA and ATA boots (well,
    at least the atapci, ata, and ad lines).  I am interested not only in
    the controller it detects, but also the DMA mode it detects and whether
    it detects an old style cable or not.

    Go into your BIOS SETUP and force the DMA mode to UDMA33 (UDMA mode 2),
    and see if you still get core dumps and such when you boot with NATA.
    (but I need to know the dmesg output without the BIOS DMA setting forced
    down, so extract the dmesg lines first).

atapci0: <Intel ICH3 UDMA100 controller> port 0xbfa0-0xbfaf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0 ata0: <ATA channel 0> on atapci0 ad0: 76319MB <Hitachi HTS541280H9AT00 HP3OA23C> at ata0-master UDMA100 ata1: <ATA channel 1> on atapci0

Looks like NATA's atapci0 uses different IO ports from the old ATA's

Best Regards,
sephe

--
Live Free or Die



[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]