DragonFly kernel List (threaded) for 2005-08
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]
wireless ethernet
I've been trying to get my laptop (HP Pavillion ze4500) working with my wireless ethernet,
and am sure I'm overlooking something obvious. I have a number of cards available, all of
which seem to behave in a similar fashion: ifconfig seems to see them fine, reports their
MAC address correctly, etc; I can't get any of them to associate with my base station under
DragonFly. All of the cards do work fine with the same base station under various other
operating systems on various machines.
The lowest common denominator among the cards is a DWL-650 which works with the wi driver
(and which I've used on the same network with FreeBSD before, albeit on a different laptop).
The base station is fine; it works with a number of other machines on the network. I
attempted to reset the base station (a Linksys WAP54G) to its factory default configuration,
and left MAC filtering and WEP off. Still no luck. I can ifconfig the card up:
# ifconfig wi0 ssid linksys up
and everything appears fine, but the card won't associate. The access point log
does not show any activity, either.
I've attached below a dmesg from ``boot -v'', pciconf -lv, and ifconfig output. If anyone
can point me in a useful direction, I'd appreciate it. I've tried to do what homework I can
but am spinning my wheels; probably it's something staring me in the face.
Thanks for any suggestions.
--
Jon Hamilton
hamilton@xxxxxxxxx
Copyright (c) 2003, 2004, 2005 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 1.2.5-RELEASE #0: Fri Aug 26 17:14:09 CDT 2005
root@xxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/LAPTOP
Calibrating clock(s) ... TSC clock: 2392369028 Hz, i8254 clock: 1258678 Hz
1258678 Hz differs from default of 1193182 Hz by more than 1%
CPU: Mobile Intel(R) Celeron(R) CPU 2.40GHz (2392.47-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebf9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 771162112 (753088K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x0056c000 - 0x2df67fff, 765444096 bytes (186876 pages)
avail memory = 739753984 (722416K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f6ab0
bios32: Entry = 0xfd750 (c00fd750) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0x14b
pnpbios: Found PnP BIOS data at 0xc00f6b10
pnpbios: Entry = f0000:aff2 Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "/kernel" at 0xc053f000.
Preloaded elf module "/modules/acpi.ko" at 0xc053f26c.
Leaving critical section, allowing interrupts
wlan: <802.11 Link Layer>
crypto: <crypto core>
Pentium Pro MTRR support enabled
md0: Malloc disk
Math emulator present
pci_open(1): mode 1 addr port (0x0cf8) is 0x80008004
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=cab21002)
pcibios: BIOS version 2.10
Using $PIR table, 9 entries at 0xc00fdf30
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
embedded 0 1 A 0x01 7 10
embedded 0 2 A 0x09 7 10
embedded 0 8 A 0x07 7 10
embedded 0 6 A 0x08 5
embedded 0 9 A 0x04 7 10
embedded 0 9 B 0x03 7 10
embedded 0 10 A 0x06 7 11
embedded 0 18 A 0x02 7 10
embedded 0 12 A 0x06 7 11
npx0.nexus0.root0[System root bus]
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
acpi0.nexus0.root0[System root bus]
acpi0: <PTLTD RSDT> [tentative] on motherboard
installed MI handler for int 9
AcpiOsDerivePciId: bus 0 dev 7 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
AcpiOsDerivePciId: bus 0 dev 7 func 0
acpi0: Power Button (fixed)
AcpiOsDerivePciId: bus 0 dev 0 func 0
unknown: I/O range not supported
cpu0.acpi0[PTLTD RSDT].nexus0.root0[System root bus]
cpu0: <ACPI CPU (3 Cx states)> [tentative] on acpi0
cpu0: <ACPI CPU (3 Cx states)> [attached!] port 0x8015,0x8014,0x8010-0x8013 on acpi0
acpi_tz0.acpi0[PTLTD RSDT].nexus0.root0[System root bus]
acpi_tz0: <Thermal Zone> [tentative] on acpi0
acpi_tz0: <Thermal Zone> [attached!] on acpi0
acpi_button0.acpi0[PTLTD RSDT].nexus0.root0[System root bus]
acpi_button0: <Power Button> [tentative] on acpi0
acpi_button0: <Power Button> [attached!] on acpi0
acpi_lid0.acpi0[PTLTD RSDT].nexus0.root0[System root bus]
acpi_lid0: <Control Method Lid Switch> [tentative] on acpi0
acpi_lid0: <Control Method Lid Switch> [attached!] on acpi0
acpi_acad0.acpi0[PTLTD RSDT].nexus0.root0[System root bus]
acpi_acad0: <AC Adapter> [tentative] on acpi0
acpi_acad0: <AC Adapter> [attached!] on acpi0
acpi_cmbat0.acpi0[PTLTD RSDT].nexus0.root0[System root bus]
acpi_cmbat0: <Control Method Battery> [tentative] on acpi0
acpi_cmbat0: <Control Method Battery> [attached!] on acpi0
unknown: not probed (disabled)
isab0.acpi0[PTLTD RSDT].nexus0.root0[System root bus]
isab0: <ACPI Generic ISA bridge> [tentative] on acpi0
isab0: <ACPI Generic ISA bridge> [attached!] on acpi0
acpi_ec0.acpi0[PTLTD RSDT].nexus0.root0[System root bus]
acpi_ec0: <Embedded Controller: GPE 0x18> [tentative] port 0x66,0x62 on acpi0
acpi_ec0: info: new max delay is 20 us
acpi_ec0: <Embedded Controller: GPE 0x18> [attached!] port 0x66,0x62 on acpi0
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
acpi0: <PTLTD RSDT> [attached!] at irq 9 on motherboard
pcib0.nexus0.root0[System root bus]
pcib0: <Host to PCI bridge> [tentative] at pcibus 0 on motherboard
pci0.pcib0[Host to PCI bridge].nexus0.root0[System root bus]
pci0: <PCI bus> [tentative] on pcib0
pci0: pci_attach() physical bus=0
map[10]: type 1, range 32, base d8000000, size 26
map[14]: type 1, range 32, base d4005000, size 12
found-> vendor=0x1002, dev=0xcab2, revid=0x02
bus=0, slot=0, func=0
class=[BRIDGE]06-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x1002, dev=0x7010, revid=0x00
bus=0, slot=1, func=0
class=[BRIDGE]06-04-00, hdrtype=0x01, mfdev=0
subordinatebus=1 secondarybus=1
map[10]: type 1, range 32, base d4000000, size 12
found-> vendor=0x10b9, dev=0x5237, revid=0x03
bus=0, slot=2, func=0
class=[SERIALBUS]0c-03-10, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
map[10]: type 1, range 32, base 00001000, size 8
found-> vendor=0x10b9, dev=0x5451, revid=0x02
bus=0, slot=6, func=0
class=[MULTIMEDIA]04-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=5
found-> vendor=0x10b9, dev=0x1533, revid=0x00
bus=0, slot=7, func=0
class=[BRIDGE]06-01-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
found-> vendor=0x10b9, dev=0x5457, revid=0x00
bus=0, slot=8, func=0
class=[SIMPLECOMM]07-03-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
found-> vendor=0x1217, dev=0x6972, revid=0x00
bus=0, slot=10, func=0
class=[BRIDGE]06-07-00, hdrtype=0x02, mfdev=0
subordinatebus=2 secondarybus=2
intpin=a, irq=11
map[20]: type 1, range 32, base 00002000, size 4
found-> vendor=0x10b9, dev=0x5229, revid=0xc4
bus=0, slot=16, func=0
class=[STORAGE]01-01-fa, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
found-> vendor=0x10b9, dev=0x7101, revid=0x00
bus=0, slot=17, func=0
class=[BRIDGE]06-80-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
map[10]: type 1, range 32, base 00002400, size 8
map[14]: type 1, range 32, base d4004000, size 12
found-> vendor=0x100b, dev=0x0020, revid=0x00
bus=0, slot=18, func=0
class=[NETWORK]02-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=10
pcib1.pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
pcib1: <PCI to PCI bridge (vendor=1002 device=7010)> [tentative] at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0x9000-0x9fff
pcib1: memory decode 0xd4300000-0xd43fffff
pcib1: prefetched decode 0xdc000000-0xdfffffff
pci1.pcib1[PCI to PCI bridge (vendor=1002 device=7010)].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
pci1: <PCI bus> [tentative] on pcib1
pci1: pci_attach() physical bus=1
map[10]: type 1, range 32, base dc000000, size 26
map[14]: type 1, range 32, base 00009000, size 8
map[18]: type 1, range 32, base d4300000, size 16
found-> vendor=0x1002, dev=0x4337, revid=0x00
bus=1, slot=5, func=0
class=[DISPLAY]03-00-00, hdrtype=0x00, mfdev=0
subordinatebus=0 secondarybus=0
intpin=a, irq=255
pci1: <ATI model 4337 graphics accelerator> (vendor=0x1002, dev=0x4337) at 5.0
pci1: <PCI bus> [attached!] on pcib1
pcib1: <PCI to PCI bridge (vendor=1002 device=7010)> [attached!] at device 1.0 on pci0
ohci0.pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> [tentative] mem 0xd4000000-0xd4000fff irq 10 at device 2.0 on pci0
installed MI handler for int 10
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0.ohci0[AcerLabs M5237 (Aladdin-V) USB controller].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> [tentative] on ohci0
usb0: USB revision 1.0
uhub0: AcerLabs OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
usb0: <AcerLabs M5237 (Aladdin-V) USB controller> [attached!] on ohci0
ohci0: <AcerLabs M5237 (Aladdin-V) USB controller> [attached!] mem 0xd4000000-0xd4000fff irq 10 at device 2.0 on pci0
pcm0.pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
pcm0: <Acer Labs M5451> [tentative] port 0x1000-0x10ff irq 5 at device 6.0 on pci0
pcm0: <Conexant CX20468 AC97 Codec (id = 0x43585429)>
pcm0: Codec features reserved, headphone, 18 bit DAC, 18 bit ADC, 5 bit master volume, no 3D Stereo Enhancement
pcm0: Primary codec extended features variable rate PCM, AMAP
installed MI handler for int 5
pcm0: sndbuf_setmap 2d050000, 1000; 0xcfe8f000 -> 2d050000
pcm0: sndbuf_setmap 2d052000, 1000; 0xcfe91000 -> 2d052000
pcm0: sndbuf_setmap 2d0d4000, 1000; 0xcfe93000 -> 2d0d4000
pcm0: sndbuf_setmap 2d0d6000, 1000; 0xcfe95000 -> 2d0d6000
pcm0: sndbuf_setmap 2d0d8000, 1000; 0xcfe97000 -> 2d0d8000
pcm0: <Acer Labs M5451> [attached!] port 0x1000-0x10ff irq 5 at device 6.0 on pci0
isab1.pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
isab1: <AcerLabs M1533 portable PCI-ISA bridge> [tentative] at device 7.0 on pci0
isa0.isab1[AcerLabs M1533 portable PCI-ISA bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
isa0: <ISA bus> [tentative] on isab1
isa0: <ISA bus> [attached!] on isab1
isab1: <AcerLabs M1533 portable PCI-ISA bridge> [attached!] at device 7.0 on pci0
pci0: <unknown card> (vendor=0x10b9, dev=0x5457) at 8.0
cbb0.pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> [tentative] irq 11 at device 10.0 on pci0
cardbus0.cbb0[O2Micro OZ6912/6972 PCI-CardBus Bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
cardbus0: <CardBus bus> [tentative] on cbb0
cardbus0: <CardBus bus> [attached!] on cbb0
pccard0.cbb0[O2Micro OZ6912/6972 PCI-CardBus Bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
pccard0: <16-bit PCCard bus> [tentative] on cbb0
pccard0: <16-bit PCCard bus> [attached!] on cbb0
installed MI handler for int 11
cbb0: <O2Micro OZ6912/6972 PCI-CardBus Bridge> [attached!] irq 11 at device 10.0 on pci0
atapci0.pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
atapci0: <AcerLabs Aladdin ATA100 controller> [tentative] port 0x2000-0x200f at device 16.0 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0x2000
ata0: mask=03 ostat0=50 ostat2=00
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 00 00
ata0: mask=03 stat0=50 stat1=00
ata0-master: ATA 01 a5
ata0: devices=01
ata0.atapci0[AcerLabs Aladdin ATA100 controller].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
ata0 [tentative]: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata0 [attached!]: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0x2008
ata1: mask=03 ostat0=50 ostat2=00
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: mask=03 stat0=10 stat1=00
ata1: devices=04
ata1.atapci0[AcerLabs Aladdin ATA100 controller].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
ata1 [tentative]: at 0x170 irq 15 on atapci0
installed MI handler for int 15
ata1 [attached!]: at 0x170 irq 15 on atapci0
atapci0: <AcerLabs Aladdin ATA100 controller> [attached!] port 0x2000-0x200f at device 16.0 on pci0
pci0: <AcerLabs M15x3 Power Management Unit> (vendor=0x10b9, dev=0x7101) at 17.0
sis0.pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
sis0: <NatSemi DP8381[56] 10/100BaseTX> [tentative] port 0x2400-0x24ff mem 0xd4004000-0xd4004fff irq 10 at device 18.0 on pci0
miibus0.sis0[NatSemi DP8381[56] 10/100BaseTX].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
miibus0: <MII bus> [tentative] on sis0
ukphy0.miibus0[MII bus].sis0[NatSemi DP8381[56] 10/100BaseTX].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
ukphy0: <Generic IEEE 802.3u media interface> [tentative] on miibus0
ukphy0: OUI 0x080017, model 0x0002, rev. 1
ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ukphy0: <Generic IEEE 802.3u media interface> [attached!] on miibus0
miibus0: <MII bus> [attached!] on sis0
sis0: bpf attached
sis0: MAC address: 00:0d:9d:45:8f:a3
using shared irq10.
sis0: <NatSemi DP8381[56] 10/100BaseTX> [attached!] port 0x2400-0x24ff mem 0xd4004000-0xd4004fff irq 10 at device 18.0 on pci0
pci0: <PCI bus> [attached!] on pcib0
pcib0: <Host to PCI bridge> [attached!] at pcibus 0 on motherboard
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0.isa0[ISA bus].isab1[AcerLabs M1533 portable PCI-ISA bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
orm0: <Option ROMs> [tentative] at iomem 0xc0000-0xcefff,0xcf000-0xcf7ff,0xdb000-0xdbfff,0xdc000-0xdffff on isa0
orm0: <Option ROMs> [attached!] at iomem 0xc0000-0xcefff,0xcf000-0xcf7ff,0xdb000-0xdbfff,0xdc000-0xdffff on isa0
pmtimer0.isa0[ISA bus].isab1[AcerLabs M1533 portable PCI-ISA bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
pmtimer0 [tentative] on isa0
pmtimer0 [attached!] on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
fdc0 [tentative] failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
ata2 [tentative] failed to probe at port 0x1f0 irq 14 on isa0
ata3 [tentative] failed to probe at port 0x170 irq 15 on isa0
atkbdc0.isa0[ISA bus].isab1[AcerLabs M1533 portable PCI-ISA bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
atkbdc0: <Keyboard controller (i8042)> [tentative] at port 0x60,0x64 on isa0
atkbd0.atkbdc0[Keyboard controller (i8042)].isa0[ISA bus].isab1[AcerLabs M1533 portable PCI-ISA bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
atkbd0: <AT Keyboard> [tentative] flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
installed MI handler for int 1
atkbd0: <AT Keyboard> [attached!] flags 0x1 irq 1 on atkbdc0
psm0: current command byte:0047
psm0.atkbdc0[Keyboard controller (i8042)].isa0[ISA bus].isab1[AcerLabs M1533 portable PCI-ISA bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
psm0: <PS/2 Mouse> [tentative] irq 12 on atkbdc0
installed MI handler for int 12
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:00000000, flags:00000000, packet size:4
psm0: syncmask:08, syncbits:08
psm0: <PS/2 Mouse> [attached!] irq 12 on atkbdc0
atkbdc0: <Keyboard controller (i8042)> [attached!] at port 0x60,0x64 on isa0
vga0.isa0[ISA bus].isab1[AcerLabs M1533 portable PCI-ISA bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
vga0: <Generic ISA VGA> [tentative] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 1b
24 b3 00 6f 0d 0e 00 00 07 80 49 8b 8f 28 1f 47
6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 e7 a3 4f 67 8f 6a 1b
24 b3 00 6f 0d 0e 00 00 07 80 49 8b 8f 28 1f 47
6d a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vga0: <Generic ISA VGA> [attached!] at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0.isa0[ISA bus].isab1[AcerLabs M1533 portable PCI-ISA bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
sc0: <System console> [tentative] at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sc0: <System console> [attached!] at flags 0x100 on isa0
sio0: irq maps: 0x1 0x11 0x1 0x1
sio0.isa0[ISA bus].isab1[AcerLabs M1533 portable PCI-ISA bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
sio0 [tentative] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio0 [attached!] at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio1: can't drain, serial port might not exist, disabling
sio1 [tentative] failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0.isa0[ISA bus].isab1[AcerLabs M1533 portable PCI-ISA bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
ppc0: <Parallel port> [tentative] at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/1 bytes threshold
ppbus0.ppc0[Parallel port].isa0[ISA bus].isab1[AcerLabs M1533 portable PCI-ISA bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
ppbus0: <Parallel port bus> [tentative] on ppc0
plip0.ppbus0[Parallel port bus].ppc0[Parallel port].isa0[ISA bus].isab1[AcerLabs M1533 portable PCI-ISA bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
plip0: <PLIP network interface> [tentative] on ppbus0
lp0: bpf attached
plip0: <PLIP network interface> [attached!] on ppbus0
lpt0.ppbus0[Parallel port bus].ppc0[Parallel port].isa0[ISA bus].isab1[AcerLabs M1533 portable PCI-ISA bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
lpt0: <Printer> [tentative] on ppbus0
lpt0: Interrupt-driven port
lpt0: <Printer> [attached!] on ppbus0
ppi0.ppbus0[Parallel port bus].ppc0[Parallel port].isa0[ISA bus].isab1[AcerLabs M1533 portable PCI-ISA bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
ppi0: <Parallel I/O> [tentative] on ppbus0
ppi0: <Parallel I/O> [attached!] on ppbus0
ppbus0: <Parallel port bus> [attached!] on ppc0
installed MI handler for int 7
ppc0: <Parallel port> [attached!] at port 0x378-0x37f irq 7 on isa0
isa_probe_children: probing PnP devices
BIOS Geometries:
0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
0 accounted for
Device configuration finished.
installed MI handler for int 0
sl0: bpf attached
lo0: bpf attached
ppp0: bpf attached
new masks: bio 68c400, tty 6310b2, net 671cb2
crypto: assign driver 0, flags 2
crypto: driver 0 registers alg 1 flags 0 maxoplen 0
crypto: driver 0 registers alg 2 flags 0 maxoplen 0
crypto: driver 0 registers alg 3 flags 0 maxoplen 0
crypto: driver 0 registers alg 4 flags 0 maxoplen 0
crypto: driver 0 registers alg 5 flags 0 maxoplen 0
crypto: driver 0 registers alg 17 flags 0 maxoplen 0
crypto: driver 0 registers alg 6 flags 0 maxoplen 0
crypto: driver 0 registers alg 7 flags 0 maxoplen 0
crypto: driver 0 registers alg 15 flags 0 maxoplen 0
crypto: driver 0 registers alg 8 flags 0 maxoplen 0
crypto: driver 0 registers alg 16 flags 0 maxoplen 0
crypto: driver 0 registers alg 9 flags 0 maxoplen 0
crypto: driver 0 registers alg 10 flags 0 maxoplen 0
crypto: driver 0 registers alg 13 flags 0 maxoplen 0
crypto: driver 0 registers alg 14 flags 0 maxoplen 0
crypto: driver 0 registers alg 11 flags 0 maxoplen 0
crypto: driver 0 registers alg 18 flags 0 maxoplen 0
cpu0: set speed to 100.0%
acpi_cpu: throttling enabled, 8 steps (100% to 12.5%), currently 100.0%
acpi_acad0: acline initialization start
acpi_ec0: info: new max delay is 140 us
acpi_ec0: info: new max delay is 170 us
acpi_acad0: On Line
acpi_acad0: acline initialization done, tried 1 times
acpi_cmbat0: battery initialization start
acpi_cmbat0: battery initialization failed, giving up
pccard0: CIS version PC Card Standard 5.0
pccard0: CIS info: D, Link DWL-650 11Mbps WLAN Card, Version 01.02,
pccard0: Manufacturer code 0x156, product 0x2
pccard0: function 0: network adapter, ccr addr 3e0 mask 1
pccard0: function 0, config table entry 1: I/O card; irq mask ffff; iomask 6, iospace 0-3f; io16 irqpulse irqlevel
wi0.pccard0[16-bit PCCard bus].cbb0[O2Micro OZ6912/6972 PCI-CardBus Bridge].pci0[PCI bus].pcib0[Host to PCI bridge].nexus0.root0[System root bus]
wi0: <WaveLAN/IEEE> [tentative] at port 0x100-0x13f irq 11 function 0 config 1 on pccard0
wi0: using RF:PRISM2 MAC:HFA3841 CARD:HWB3163-SST-flash
wi0: Intersil Firmware: Primary (0.3.0), Station (0.8.2)
wi0: bpf attached
wi0: MAC address: 00:05:5d:f2:c1:50
wi0: bpf attached
wi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
wi0: bpf attached
wi0: <WaveLAN/IEEE> [attached!] at port 0x100-0x13f irq 11 function 0 config 1 on pccard0
ad0: success setting UDMA5 on Acer chip
ar: FreeBSD check1 failed
ad0: <SAMSUNG MP0603H/UD100-11> ATA-7 disk at ata0-master
ad0: 57277MB (117304992 sectors), 116374 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA100
ad0: piomode=4 dmamode=2 udmamode=5 cblid=1
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on Acer chip
acd0: <QSI CD-RW/DVD-ROM SBW-241/VH04> CD-RW drive at ata1 as master
acd0: read 4125KB/s (32015KB/s) write 4136KB/s (4136KB/s), 2048KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, DVD-ROM, DVD-R, packet
acd0: Writes: CD-R, CD-RW, test write, burnproof
acd0: Audio: play, 256 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
(probe2:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe2:ata1:0:0:0): NOT READY asc:3a,0
(probe2:ata1:0:0:0): Medium not present
pass0 at ata1 bus 0 target 0 lun 0
pass0: <QSI CDRW/DVD SBW-241 VH04> Removable CD-ROM SCSI-0 device
pass0: Serial Number [
pass0: 16.000MB/s transfers
bootdev: a0500000 type=0 unit=0 slice=5 part=0 major=3
Mounting root from ufs:/dev/ad0s4a
(cd0:ata1:0:0:0): READ CD RECORDED CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(cd0:ata1:0:0:0): NOT READY asc:3a,0
(cd0:ata1:0:0:0): Medium not present
cd0 at ata1 bus 0 target 0 lun 0
cd0: <QSI CDRW/DVD SBW-241 VH04> Removable CD-ROM SCSI-0 device
cd0: Serial Number [
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ad0s1: type 0x83, start 63, end = 273104, size 273042 : OK
ad0s2: type 0x83, start 273105, end = 1783214, size 1510110 : OK
ad0s3: type 0x83, start 1783215, end = 58444469, size 56661255 : OK
ad0s4: type 0xa5, start 58444470, end = 117290564, size 58846095 : OK
start_init: trying /sbin/init
acpi_ec0: info: new max delay is 190 us
acpi_ec0: info: new max delay is 300 us
acpi_ec0: info: new max delay is 11000 us
hostb0@pci0:0:0: class=0x060000 card=0x00000000 chip=0xcab21002 rev=0x02 hdr=0x00
vendor = 'ATI Technologies'
class = bridge
subclass = HOST-PCI
pcib1@pci0:1:0: class=0x060400 card=0x00000000 chip=0x70101002 rev=0x00 hdr=0x01
vendor = 'ATI Technologies'
class = bridge
subclass = PCI-PCI
ohci0@pci0:2:0: class=0x0c0310 card=0x002a103c chip=0x523710b9 rev=0x03 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'ALI M5237 USB Host Controller'
class = serial bus
subclass = USB
pcm0@pci0:6:0: class=0x040100 card=0x002a103c chip=0x545110b9 rev=0x02 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'ALI M5451 PCI AC-Link Controller Audio Device'
class = multimedia
subclass = audio
isab1@pci0:7:0: class=0x060100 card=0x153310b9 chip=0x153310b9 rev=0x00 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'ALI M1533 Aladdin IV ISA Bridge'
class = bridge
subclass = PCI-ISA
none0@pci0:8:0: class=0x070300 card=0x002a103c chip=0x545710b9 rev=0x00 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'ALI N5457 Agere Systems AC97 Modem'
class = simple comms
subclass = generic modem
cbb0@pci0:10:0: class=0x060700 card=0x002a103c chip=0x69721217 rev=0x00 hdr=0x02
vendor = 'O2 Micro Inc'
device = 'OZ6912 CardBus Controller'
class = bridge
subclass = PCI-CardBus
atapci0@pci0:16:0: class=0x0101fa card=0x002a103c chip=0x522910b9 rev=0xc4 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'M1543 Southbridge EIDE Controller'
class = mass storage
subclass = ATA
none1@pci0:17:0: class=0x068000 card=0x002a103c chip=0x710110b9 rev=0x00 hdr=0x00
vendor = 'Acer Labs Incorporated (ALi)'
device = 'ALI M7101 Power Management Controller'
class = bridge
subclass = PCI-unknown
sis0@pci0:18:0: class=0x020000 card=0x002a103c chip=0x0020100b rev=0x00 hdr=0x00
vendor = 'National Semiconductor'
device = 'DP83815/16 MacPhyter 10/100 Mb/s Ethernet MAC & PHY'
class = network
subclass = ethernet
none2@pci1:5:0: class=0x030000 card=0x002a103c chip=0x43371002 rev=0x00 hdr=0x00
vendor = 'ATI Technologies'
device = 'RS200M Mobility M6 (U2)'
class = display
subclass = VGA
wi0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether 00:05:5d:f2:c1:50
media: IEEE 802.11 Wireless Ethernet autoselect (DS/2Mbps)
status: no carrier
ssid linksys 1:linksys
stationname "DragonFly WaveLAN/IEEE node"
channel -1 authmode OPEN powersavemode OFF powersavesleep 100
rtsthreshold 2312 protmode CTS
wepmode OFF weptxkey 1
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]
