Can't get ed1 to show up

[Jonathon McKitrick <jcm@xxxxxxxxxxxxxxxxx>]

This is an odd one.  Until DFly (cvsupped today) I only have to include
miibus and ed to get my ed1 to show up.  Now, I am cutting out pieces of
GENERIC to get it to work, and I am missing something, because only GENERIC
finds it!

I leave the pccard settings untouched...

hell with it.  Here's my config.

Below is my edited dmesg output, from the non-working and working kernels,
respectively.


SNAKEPIT - not working
--------------8<-----------------
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
cbb0: <ToPIC97 PCI-CardBus Bridge> at device 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci_cfgintr: 0:2 INTA routed to irq 11
installed MI handler for int 11
cbb1: <ToPIC97 PCI-CardBus Bridge> at device 2.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci_cfgintr: 0:2 INTB routed to irq 11
pci0: <Chips & Technologies 65555 SVGA controller> at 4.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
pci0: <Intel 82371AB/EB (PIIX4) USB controller> at 7.2 irq 11
pci0: <Intel 82371AB Power management controller> at 7.3
pci0: <Toshiba Fast Infra Red controller> at 10.0 irq 11
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
ata1-slave: ATAPI identify retries exceeded
ata4 at port 0x100-0x11f,0x120 irq 11 function 0 config 16 on pccard0
ad0: 4126MB <IBM-DKLA-24320> [8944/15/63] at ata0-master UDMA33
---------------8<------------------

end SNAKEPIT dmesg.
Note the ata4!!!

GENERIC
---------------8<------------------
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
cbb0: <ToPIC97 PCI-CardBus Bridge> at device 2.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pci_cfgintr: 0:2 INTA routed to irq 11
installed MI handler for int 11
cbb1: <ToPIC97 PCI-CardBus Bridge> at device 2.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
pci_cfgintr: 0:2 INTB routed to irq 11
pci0: <Chips & Technologies 65555 SVGA controller> at 4.0
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0xfe60-0xfe6f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xffe0-0xffff irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <Intel 82371AB Power management controller> at 7.3
pci0: <Toshiba Fast Infra Red controller> at 10.0 irq 11
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 765 or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model GlidePoint, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/16 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
ata1-slave: ATAPI identify retries exceeded
ncv: cr0_cmd CMD_NOP|CMD_DMA failed
ed1: <Linksys Combo EthernetCard> at port 0x100-0x11f irq 11 function 0 config 16 on pccard0
ed1: address 00:e0:98:71:18:63, type Linksys (16 bit) 
lxtphy0: <LXT970 10/100 media interface> on miibus0
lxtphy0:  100baseFX, 100baseFX-FDX, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
ad0: 4126MB <IBM-DKLA-24320> [8944/15/63] at ata0-master UDMA33

---------------8<------------------

Note: ed1 shows up after ata1-slave, rather than ata4!!!


jm
-- 
My other computer is your Windows box.

#
# SNAKEPIT
#

machine		i386
cpu		I386_CPU
cpu		I486_CPU
cpu		I586_CPU
cpu		I686_CPU
ident		SNAKEPIT
maxusers	0

makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols

options 	MATH_EMULATE		#Support for x87 emulation
options 	INET			#InterNETworking
options 	INET6			#IPv6 communications protocols
options 	FFS			#Berkeley Fast Filesystem
options 	FFS_ROOT		#FFS usable as root device [keep this!]
options 	SOFTUPDATES		#Enable FFS soft updates support
options 	UFS_DIRHASH		#Improve performance on big directories
options 	MFS			#Memory Filesystem
options 	MD_ROOT			#MD is a potential root device
options 	NFS			#Network Filesystem
options 	NFS_ROOT		#NFS usable as root device, NFS required
options 	MSDOSFS			#MSDOS Filesystem
options 	CD9660			#ISO 9660 Filesystem
options 	CD9660_ROOT		#CD-ROM usable as root, CD9660 required
options 	PROCFS			#Process filesystem
options 	COMPAT_43		#Compatible with BSD 4.3 [KEEP THIS!]
options 	SCSI_DELAY=15000	#Delay (in ms) before probing SCSI
options 	UCONSOLE		#Allow users to grab the console
options 	USERCONFIG		#boot -c editor
options 	VISUAL_USERCONFIG	#visual boot -c editor
options 	KTRACE			#ktrace(1) support
options 	SYSVSHM			#SYSV-style shared memory
options 	SYSVMSG			#SYSV-style message queues
options 	SYSVSEM			#SYSV-style semaphores
options 	P1003_1B		#Posix P1003_1B real-time extensions
options 	_KPOSIX_PRIORITY_SCHEDULING
options 	ICMP_BANDLIM		#Rate limit bad replies
options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
					# output.  Adds ~128k to driver.
options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug 
					# output.  Adds ~215k to driver.

# To make an SMP kernel, the next two are needed
#options 	SMP			# Symmetric MultiProcessor Kernel
#options 	APIC_IO			# Symmetric (APIC) I/O

# Debugging for Development
options         DDB
#options         INVARIANTS
#options         INVARIANT_SUPPORT

device		isa
device		eisa
device		pci

# Floppy drives
device		fdc0	at isa? port IO_FD1 irq 6 drq 2
device		fd0	at fdc0 drive 0
device		fd1	at fdc0 drive 1

# ATA and ATAPI devices
device		ata0	at isa? port IO_WD1 irq 14
device		ata1	at isa? port IO_WD2 irq 15
device		ata
device		atadisk			# ATA disk drives
device		atapicd			# ATAPI CDROM drives
device		atapifd			# ATAPI floppy drives
#device		atapist			# ATAPI tape drives
#device		atapicam		# Emulate ATAPI devices as SCSI via CAM
options 	ATA_STATIC_ID		#Static device numbering

# SCSI Controllers

# SCSI peripherals

# RAID controllers interfaced to the SCSI subsystem

# RAID controllers

# atkbdc0 controls both the keyboard and the PS/2 mouse
device		atkbdc0	at isa? port IO_KBD
device		atkbd0	at atkbdc? irq 1 flags 0x1
device		psm0	at atkbdc? irq 12

device		vga0	at isa?

# splash screen/screen saver
pseudo-device	splash

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? flags 0x100

device		agp		# support several AGP chipsets

# Floating point support - do not disable.
device		npx0	at nexus? port IO_NPX irq 13

# Power management support (see LINT for more options)
device		apm0	at nexus? flags 0x20 # Advanced Power Management

# PCCARD (PCMCIA) support
device		pccard
device		cardbus
device		cbb

# Serial (COM) ports
device		sio0	at isa? port IO_COM1 flags 0x10 irq 4
device		sio1	at isa? port IO_COM2 irq 3
device		sio2	at isa? disable port IO_COM3 irq 5
device		sio3	at isa? disable port IO_COM4 irq 9

# Parallel port
device		ppc0	at isa? irq 7
device		ppbus		# Parallel port bus (required)
device		lpt		# Printer
device		plip		# TCP/IP over parallel
device		ppi		# Parallel port interface device
#device		vpo		# Requires scbus and da


# PCI Ethernet NICs.
device		de		# DEC/Intel DC21x4x (``Tulip'')
device		em		# Intel PRO/1000 adapter Gigabit Ethernet Card (``Wiseman'')
device		txp		# 3Com 3cR990 (``Typhoon'')
device		vx		# 3Com 3c590, 3c595 (``Vortex'')

# PCI Ethernet NICs that use the common MII bus controller code.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device		miibus		# MII bus support
device		dc		# DEC/Intel 21143 and various workalikes
device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
device		pcn		# AMD Am79C97x PCI 10/100 NICs
device		rl		# RealTek 8129/8139
device		sf		# Adaptec AIC-6915 (``Starfire'')
device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
device		ste		# Sundance ST201 (D-Link DFE-550TX)
device		tl		# Texas Instruments ThunderLAN
device		tx		# SMC EtherPower II (83c170 ``EPIC'')
device		vr		# VIA Rhine, Rhine II
device		wb		# Winbond W89C840F
device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
device		bge		# Broadcom BCM570x (``Tigon III'')

# ISA Ethernet NICs.
# 'device ed' requires 'device miibus'
device		ed0	at isa? disable port 0x280 irq 10 iomem 0xd8000
device		ex
device		ep
device		fe0	at isa? disable port 0x300

# Pseudo devices - the number indicates how many units to allocate.
pseudo-device	loop		# Network loopback
pseudo-device	ether		# Ethernet support
pseudo-device	sl	1	# Kernel SLIP
pseudo-device	ppp	1	# Kernel PPP
pseudo-device	tun		# Packet tunnel.
pseudo-device	pty		# Pseudo-ttys (telnet etc)
pseudo-device	md		# Memory "disks"
pseudo-device	gif		# IPv6 and IPv4 tunneling
pseudo-device	faith	1	# IPv6-to-IPv4 relaying (translation)

# The `bpf' pseudo-device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
pseudo-device	bpf		#Berkeley packet filter
#options		PFIL_HOOKS	#Packetfilter hooks