DragonFly BSD
DragonFly kernel List (threaded) for 2004-02
[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]

Re: Heads up: NEWCARD is coming


From: Dylan Reinhold <dylan@xxxxxxxxxxxxxxxx>
Date: Sun, 08 Feb 2004 22:43:48 -0800

Jeroen Ruigrok/asmodai wrote:

-On [20040209 01:52], Dylan Reinhold (dylan@xxxxxxxxxxxxxxxx) wrote:


Anything you want me to try???



Boot verbose with both kernels and send both /var/run/dmesg.boot outputs to the list.

Also grab a pciconf -vl please and put it here.



Here are the files. When booting the old kernel the wireless card was removed ( It locks up my system ). When booting the patched kernel both cards were inserted..

Dylan
Copyright (c) 2003-2004 The DragonFly Pr\^?ject.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.0-CURRENT #0: Wed Feb  4 17:36:01 GMT 2004
    dylan@:/usr/obj/usr/src/sys/GENERIC
CPU: Pentium II/Pentium II Xeon/Celeron (300.68-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134152192 (131008K bytes)
avail memory = 121708544 (118856K bytes)
Preloaded elf kernel "/kernel.old" at 0xc0593000.
Preloaded elf module "/modules/splash_bmp.ko" at 0xc05931ec.
Preloaded elf module "/modules/vesa.ko" at 0xc0593298.
VESA: v2.0, 1984k memory, flags:0x0, mode table:0xc0590382 (1000022)
VESA: MagicGraph 128XD 48K SVGA BIOS
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 5 entries at 0xc00fb940
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0: <NeoMagic MagicGraph 128XD SVGA controller> at 2.0 irq 11
pcic0: <TI PCI-1131 PCI-CardBus Brid\M-ge> irq 11 at device 3.0 on pci0
pcic0: PCI Memory allocated: 0x88000000
pcic0: TI113X PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq]
installed MI handler for int 11
pccard0: <PC Card 16-bit bus (classic)> on pcic0
pcic1: <TI PCI-1131 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
pcic1: PCI Memory allocated: 0x88001000
pcic1: TI113X PCI Config Reg: [ring enable][speaker enable][CSC serial isa irq]
pccard1: <PC Card 16-bit bus (classic)> on pcic1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xece0-0xecff irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <Intel 82371AB Power management controller> at 7.3
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mo\M-use> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
installed MI handler for int 3
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
ata1-slave: ATAPI ilentify retries exceeded
pccard: card inserted, slot 0
ad0: 6194MB <TOSHIBA MK6412MAT> [13424/15/63] at ata0-master UDMA33
acd0: CD-RW <SONY CD-RW CRX700E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY CD-RW  CRX700E 1.4u> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
ep0: <3Com 3C574B, Megahertz 3CCFE574BT or Fast Etherlink 3C574-TX> at port 0x240-0x25f irq 11 flags 0x1 slot 0 on pccard0
ep0: Ethernet address 00:50:04:fd:d1:74
Copyright (c) 2003-2004 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
DragonFly 1.0-CURRENT #1: Sun Feb  8 15:16:22 GMT 2004
    root@xxxxxxxxxxxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
CPU: Pentium II/Pentium II Xeon/Celeron (300.68-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x652  Stepping = 2
  Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR>
real memory  = 134152192 (131008K bytes)
avail memory = 121729024 (118876K bytes)
Preloaded elf kernel "/kernel" at 0xc059e000.
Preloaded elf module "/modules/splash_bmp.ko" at 0xc059e1e8.
Preloaded e\M-lf module "/modules/vesa.ko" at 0xc059e294.
VESA: v2.0, 1984k memory, flags:0x0, mode table:\M-0xc059b382 (1000022)
VESA: MagicGraph 128XD 48K SVGA BIOS
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 5 entries at 0xc00fb940
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Intel 82443BX host to PCI bridge (AGP disabled)> at pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
pci0:(<NeoMagic MagicGraph 128XD SVGA controller> at 2.0 irq 11
cbb0: <TI1131 PCI-CardBus Bridge> irq 11 at device 3.0 on pci0
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
installed MI handler for int 11
cbb1: <TI1131 PCI-CardBus Bridge> irq 11 at device 3.1 on pci0
cardbus1: <CardBus bus> on cbb1
pccard1: <16-bit PCCard bus> on cbb1
isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 ATA33 controller> port 0x860-0x86f at device 7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
installed MI handler for int 14
ata1: at 0x170 irq 15 on atapci0
installed MI handler for int 15
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xece0-0xecff irq 11 at device 7.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <Intel 82371AB Power management controller> at 7.3
orm0: <Option ROM> at iomem 0xc0000-0xcbfff on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
installed MI handler for int 6
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
installed MI handler for int 1
psm0: <PS/2 Mouse> irq 12 on atkbdc0
installed MI handler for int 12
psm0: model Generic PS/2 mouse, device ID 0
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
installed MI handler for int 4
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
installed MI handler for int 3
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
installed MI handler for int 7
installed MI handler for int 0
ata1-slave: ATAPI identify retries exceeded
wi0 at port 0x100-0x11f irq 11 function 0 config 1 on pccard0
wi0: mac read failed 28
device_probe_and_attach: wi0 attach returned 28
wi0 at port 0x180-0x1c7 irq 11 function 0 config 1 on pccard1
wi0: 802.11 address: 00:a0:f8:32:a8:79
wi0: using RF:PRISM2 MAC:HFA3841
wi0: Symbol Firmware: Primary 2.01.02, Station 2.70.20
ad0: 6194MB <TOSHIBA MK6412MAT> [13424/15/63] at ata0-master UDMA33
acd0: CD-RW <SONY CD-RW CRXw00E> at ata1-master PIO4
Mounting root from ufs:/dev/ad0s1a
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY CD-RW  CRX700E 1.4u> Removable CD-ROM SCSI-0 device 
cd0: 16.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
hostb0@pci0:0:0:	class=0x060000 card=0x00000000 chip=0x71928086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Not Implemented)'
    class    = bridge
    subclass = HOST-PCI
none0@pci0:2:0:	class=0x030000 card=0x00741028 chip=0x000410c8 rev=0x01 hdr=0x00
    vendor   = 'Neomagic Corporation'
    device   = 'NM2160 MagicGraph 128XD'
    class    = display
    subclass = VGA
pcic0@pci0:3:0:	class=0x060700 card=0x00741028 chip=0xac15104c rev=0x01 hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCI1131 PC card CardBus Controller'
    class    = bridge
    subclass = PCI-CardBus
pcic1@pci0:3:1:	class=0x060700 card=0x00741028 chip=0xac15104c rev=0x01 hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCI1131 PC card CardBus Controller'
    class    = bridge
    subclass = PCI-CardBus
isab0@pci0:7:0:	class=0x068000 card=0x00000000 chip=0x71108086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge'
    class    = bridge
    subclass = PCI-unknown
atapci0@pci0:7:1:	class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
    class    = mass storage
    subclass = ATA
uhci0@pci0:7:2:	class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
    class    = serial bus
    subclass = USB
none1@pci0:7:3:	class=0x068000 card=0x00000000 chip=0x71138086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
    class    = bridge
    subclass = PCI-unknown
hostb0@pci0:0:0:	class=0x060000 card=0x00000000 chip=0x71928086 rev=0x02 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82443BX/ZX 440BX/ZX CPU to PCI Bridge (AGP Not Implemented)'
    class    = bridge
    subclass = HOST-PCI
none0@pci0:2:0:	class=0x030000 card=0x00741028 chip=0x000410c8 rev=0x01 hdr=0x00
    vendor   = 'Neomagic Corporation'
    device   = 'NM2160 MagicGraph 128XD'
    class    = display
    subclass = VGA
cbb0@pci0:3:0:	class=0x060700 card=0x00741028 chip=0xac15104c rev=0x01 hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCI1131 PC card CardBus Controller'
    class    = bridge
    subclass = PCI-CardBus
cbb1@pci0:3:1:	class=0x060700 card=0x00741028 chip=0xac15104c rev=0x01 hdr=0x02
    vendor   = 'Texas Instruments (TI)'
    device   = 'PCI1131 PC card CardBus Controller'
    class    = bridge
    subclass = PCI-CardBus
isab0@pci0:7:0:	class=0x068000 card=0x00000000 chip=0x71108086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M ISA Bridge'
    class    = bridge
    subclass = PCI-unknown
atapci0@pci0:7:1:	class=0x010180 card=0x00000000 chip=0x71118086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M IDE Controller'
    class    = mass storage
    subclass = ATA
uhci0@pci0:7:2:	class=0x0c0300 card=0x00000000 chip=0x71128086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M USB Interface'
    class    = serial bus
    subclass = USB
none1@pci0:7:3:	class=0x068000 card=0x00000000 chip=0x71138086 rev=0x01 hdr=0x00
    vendor   = 'Intel Corporation'
    device   = '82371AB/EB/MB PIIX4/4E/4M Power Management Controller'
    class    = bridge
    subclass = PCI-unknown


[Date Prev][Date Next]  [Thread Prev][Thread Next]  [Date Index][Thread Index]