git: kernel - Sync numerous commits from FreeBSD

[Matthew Dillon <dillon@xxxxxxxxxxxxxxxxxxxxxxx>]

commit 43f7c5533b94bf18b84d4924b43e9288b4dcdedb
Author: Matthew Dillon <dillon@apollo.backplane.com>
Date:   Wed Jun 26 22:42:56 2013 -0700

    kernel - Sync numerous commits from FreeBSD
    
    Synchronize a bunch of commits from the FreeBSD tree.  Commit
    ids shown below are from the github FreeBSD repo.
    
    Several commits were not synchronized, the main one being 3c7b39f7b5a4...
    (Bring in LSI's latest mps(4) 6Gb SAS and WarpDrive driver, version).
    This one needs to be brought in.
    
    One other note, not yet fixed is an issue where the driver configures
    many more tags than the disk drive can actually support.  In my test
    case, 255 tags for a Seagate SAS disk that really only seems to support
    63.  When large numbers of commands are queued, and even sometimes when
    not, the drive becomes severely inefficient for reads and writes.  Write
    bandwidth that is usually in the ~30-50 MB/s range drops to ~5 MB/s.
    
    Doing a camcontrol to reduce tags to ~16 or so seems to fix the issue.
    (camcontrol tags da0 -N 16), but we need a permanent solution for this
    problem.
    
    * 56527fa077227f78a92c9ebc6f4f35d1bc3e1c21
    
      Bring in a number of mps(4) driver fixes from LSI:
    
        1.  Fixed timeout specification for the msleep in mps_wait_command().
            Added 30 second timeout for mps_wait_command() calls in mps_user.c.
    
        2.  Make sure we call mps_detach_user() from the kldunload path.
    
        3.  Raid Hotplug behavior change.
    
            The driver now removes a volume when it goes to a failed state,
            so we also need to add volume back to the OS when it goes to
            opitimal/degraded/online from failed/missing.
    
            Handle raid volume add and remove from the IR_Volume event.
        4.  Added some more debugging information.
    
        5.  Replace xpt_async(AC_LOST_DEVICE, path, NULL) with
            mpssas_rescan_target().
    
            This is to work around a panic in CAM that shows up when adding a
            drive with a rescan and removing another device from the driver thread
            with an AC_LOST_DEVICE async notification.
    
            This problem was encountered in testing with the LSI sas2ircu utility,
            which was used to create a RAID volume from physical disks.  The driver
            has to create the RAID volume target and remove the physical disk
            targets, and triggered a panic in the process.
    
            The CAM issue needs to be fully diagnosed and fixed, but this works
            around the issue for now.
    
        6.  Fix some memory initialization issues in mps_free_command().
    
        7.  Resolve the "devq freeze forever" issue.  This was caused by the
            internal read capacity command issued in the non-head version of the
            driver.  When the command completed with an error, the driver wasn't
            unfreezing thd device queue.
    
            The version in head uses the CAM infrastructure for getting the read
            capacity information, and therefore doesn't have the same issue.
    
        8.  Bump the version to 13.00.00.00-fbsd. (this is very close to LSI's
            internal stable driver 13.00.00.00)
    
    * ebc4133dca40744e7e5a2037e613bf403a16cc65
    
        Return BUS_PROBE_DEFAULT instead of BUS_PROBE_VENDOR from the mps driver
        probe routine.
    
        This will allow LSI to ship drivers that return BUS_PROBE_VENDOR to
        override the in-tree version of the driver.
    
    * dce65ce6be9088b0a0444b5f603e5f110a76e249
    
        Set the max_lun field of the path inquiry CCB to 8.
    
        This allows LUNs greater than 0 to be probed.  It can be increased later if
        need be.
    
        This brings back SVN rev 224973, which was inadvertently removed with the
        import of the LSI driver.
    
    * 4b86692e31efa1f09f72ff85635a3fdfe28368c5 (not synchronized)
    
        (Make the mps(4) module depend on the cam module)
    
    * 8473fac9559e9e3560fcd37c558101cd1718ba01 (originated from DragonFly)
    
        (Correct sizeof usage)
    
    * 3c7b39f7b5a4dac525c1cf3896051741096de47a (not synchronized - TODO!)
    
        (Bring in LSI's latest mps(4) 6Gb SAS and WarpDrive driver, version)
    
    * 0069682926e482627d3f64225ad0ad6018023ce6 (not synchronized)
    
        Change the mps(4) driver to only scan a target if that is what is
        needed instead of scanning the full bus every time.
    
    * 5f97d83a2bb253e5fadfc217cb66c65542557a91
    
        Fix a small memory leak in mpssas_get_sata_identify().  The change has been
        submitted upstream as well.
    
    * e5c6ca6783da2418a0046f43f47977f4534925d3
    
        Fix kernel panic on `camcontrol reset` for specific target, caused by
        uninitialized cm_targ in mpssas_action_resetdev().
    
    * d35997f97e5bca6ac7e1dffebc4f7bc0bf4a168e
    
        Several fixes to allow firmware/BIOS flash access from user-level:
        Set max DMA segment size to 24bit, as MPI SGE supports it.
        Use mps_add_dmaseg() to add empty SGE instead of custom code.
        Tune endianness safety.
    
    * 8600cbb5b6ebb06db859c9e2c76d07be50b8ff6a
    
        Correct double "the the"
    
    * 5277f913de0e34474af844aed711a14c28c20d2b (not synchronized)
    
        (Add casts to unbreak the i386 PAE build for the mps(4) driver.)
    
    * f124bf985f4786c8ddd24f5127e7bf200d0396ad
    
        Don't lose the 255'th disk behind the initiator.
    
    * 3f7a414911a892c8c84206394eb643cbde706d20 (already synchronized)
    
        remove duplicate semicolons where possible.
    
    * bd7f0fa0bb4b7b0f87227e0c4d49a4bd9b113cf0 (not synchronized)
    
        (Reform the busdma API so that new types may be added without modifying...)
    
    * 8857575b13cf118cc89efb1b462dd314df09c180 (not applicable)
    
        (Replace the TDP_NOSLEEPING flag with a counter so that the)
    
    * 674a0b97f5232c5275bfd0394620e7809315c694 (not applicable)
    
        (Except one case mps(4) driver does not touch the data and works well...)
    
    * 3d32e6b10c85bbbaea953937412778787bba3629
    
        MFprojects/camlock r248982:
        Stop abusing xpt_periph in random plases that really have no periph related
    
    * bf0ecb667034d07b6288c04623d895a0919377c0
    
        Fix uninitialized warning in mps
    
    * 0389554b1afa82981e507befda68b56631251990
    
        Fix NULL-dereference kernel panic in case of mps_attach() failure.
    
    * 9a638117821b8de32c1f05d7244562702b4155b6
    
        Fix uninitialized memory reference in mps_read_config_page.  It was
        ...

Summary of changes:
 sys/dev/raid/mps/mps.c         |  50 ++++++------
 sys/dev/raid/mps/mps_mapping.c |   2 +
 sys/dev/raid/mps/mps_pci.c     |   3 +-
 sys/dev/raid/mps/mps_sas.c     | 180 +++++++++++++++++++++++++++++++++++------
 sys/dev/raid/mps/mps_sas.h     |   2 +
 sys/dev/raid/mps/mps_sas_lsi.c |  97 ++++++++++++++++++----
 sys/dev/raid/mps/mps_table.c   |  13 +--
 sys/dev/raid/mps/mps_user.c    |  44 +++++-----
 sys/dev/raid/mps/mpsvar.h      |  19 +++--
 9 files changed, 314 insertions(+), 96 deletions(-)

http://gitweb.dragonflybsd.org/dragonfly.git/commitdiff/43f7c5533b94bf18b84d4924b43e9288b4dcdedb


-- 
DragonFly BSD source repository