[DragonFlyBSD - Bug #2414] Lenovo S10 acpi freeze (not new)

[David Shao via Redmine <bugtracker-admin@xxxxxxxxxxxxxxxxxxxxx>]

Issue #2414 has been reported by David Shao.

----------------------------------------
Bug #2414: Lenovo S10 acpi freeze (not new)
http://bugs.dragonflybsd.org/issues/2414

Author: David Shao
Status: New
Priority: Normal
Assignee: 
Category: 
Target version: 


The Lenovo S10 is a netbook that apparently uses an Intel 945 express chipset.
I can't say any recent update has broken booting when acpi is enabled: acpi has never functioned for DragonFly.

Using master through 859bc3f7658630c523bbad944a2b95089f48de46 tcp: RFC3517bis is now officially RFC6675

Locks up after booting with acpi enabled at:

cryptosoft0: <software crypto> [attached!] on motherboard
acpi0.nexus0.root0
acpi0: <LENOVO CB-01> [tentative on motherboard]
ndepotmags=6  x mag_cap=22  for Acpi-Namespace
ndepotmags=6  x mag_cap=22  for Acpi-State
ndepotmags=6  x mag_cap=22  for Acpi-Parse
ndepotmags=6  x mag_cap=22  for Acpi-ParseExt
ndepotmags=6  x mag_cap=22  for Acpi-Operand
IOAPIC: irq9, gsi 9 edge/high -> level/low

Here are some pieces from dmesg after booting with acpi disabled:

ACPI SDT: RSDP not in EBDA
ACPI SDT: RSDP in BIOS mem
ACPI FADT: SCI irq 9, level/low
MPTABLE: warning duplicated PCI int entry for bus 0, dev 29, pin 0
MPTABLE: warning duplicated PCI int entry for bus 0, dev 31, pin 1
MPTABLE: warning duplicated PCI int entry for bus 0, dev 31, pin 1
...
CPU: Intel(R) Atom(TM) CPU N270   @ 1.60GHz (1596.02-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x106c2  Stepping = 2
  Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE>
  AMD Features=0x100000<NX>
  AMD Features2=0x1<LAHF>
...
ACPI MADT: LAPIC address 0xfee00000, flags 0x1
ACPI MADT: BSP apic id 0
ACPI MADT: cpu id 0, apic id 0
ACPI MADT: cpu id 1, apic id 1
lapic: divisor index 0, frequency 66500312 Hz
SMP: CPU0 apic_initialize():
     lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff
SMP: Waiting APs LAPIC initialization
SMP: CPU1 apic_initialize():
     lint0: 0x00010000 lint1: 0x00010400 TPR: 0x00000000 SVR: 0x000001ff
ACPI MADT: warning invalid intsrc irq 9 trig, level
ACPI MADT: IOAPIC addr 0xfec00000, apic id 2, gsi base 0
ACPI MADT: INTSRC irq 0 -> gsi 2 edge/high
...
IOAPIC: irq 9, gsi 9 -> cpu0 (sci)
IOAPIC: irq 9 -> gsi 9 edge/high
...
IOAPIC: legacy irq max 24
...
ELCR Found.  ISA IRQs programmed as:
  0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15
  E  E  E  L  E  L  E  E  E  E  L  L  E  E  E  E
MPTABLE: 0:28 INTA -> IOAPIC 0.17
MPTABLE: 0:27 INTA -> IOAPIC 0.22
MPTABLE: 0:29 INTB -> IOAPIC 0.19
MPTABLE: 0:2 INTA -> IOAPIC 0.16
MPTABLE: 0:28 INTB -> IOAPIC 0.16
MPTABLE: 0:28 INTC -> IOAPIC 0.18
MPTABLE: 0:29 INTA -> IOAPIC 0.23
MPTABLE: 0:29 INTC -> IOAPIC 0.18
MPTABLE: 0:29 INTD -> IOAPIC 0.16
MPTABLE: 0:31 INTB -> IOAPIC 0.19
MPTABLE: 2:0 INTA -> IOAPIC 0.16
...
BITS within APICID: logical_CPU_bits: 1; core_bits: 0
CPU Topology: cores_per_chip: 1; threads_per_core: 2; chips_per_package: 1;
Start scheduler helpers on cpus:
	cpu0 - HyperThreading available. Core siblings: cpu0 cpu1 
	cpu1 - HyperThreading available. Core siblings: cpu0 cpu1 
start dummy scheduler helpers on cpus: 0 1
...
IOAPIC: rman cpu0 0 - 1
IOAPIC: rman cpu0 3 - 95
IOAPIC: rman cpu0 97 - 191
IOAPIC: rman cpu1 24 - 95
IOAPIC: rman cpu1 97 - 191
npx0.nexus0.root0
npx0: <math processor> [tentative] on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
npx0: <math processor> [attached!] on motherboard
cryptosoft0.nexus0.root0
cryptosoft0: <software crypto> [tentative] on motherboard
crypto: assign cryptosoft0 driver id 0, flags 234881024
crypto: cryptosoft0 registers alg 1 flags 0 maxoplen 0
...
crypto: cryptosoft0 registers alg 17 flags 0 maxoplen 0
cryptosoft0: <software crypto> [attached!] on motherboard
pci_open(1):	mode 1 addr port (0x0cf8) is 0x8000fa04
pci_open(1a):	mode1res=0x80000000 (0x80000000)
pci_cfgcheck:	device 0 [class=060000] [hdr=00] is there (id=27ac8086)
pcibios: BIOS version 3.00
$PIR: checksum failed!
pcib0.legacy0.nexus0.root0
pcib0: <MPTABLE Host-PCI bridge> [tentative] pcibus 0 on motherboard
pci0.pcib0.legacy0.nexus0.root0
pci0: <PCI bus> [tentative] on pcib0
pci0: domain=0, physical bus=0
found->	vendor=0x8086, dev=0x27ac, revid=0x03
	domain=0, bus=0, slot=0, func=0
	class=06-00-00, hdrtype=0x00, mfdev=0
	cmdreg=0x0106, statreg=0x2090, cachelnsz=0 (dwords)
	lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found->	vendor=0x8086, dev=0x27ae, revid=0x03
	domain=0, bus=0, slot=2, func=0
...
agp0: <Intel 945GME SVGA controller> [attached!] on vgapci0
...
usb0: <Intel 82801G (ICH7) USB controller> [tentative] on uhci0



-- 
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account