[DragonFlyBSD - Bug #2292] re interface with jumbo frames (mtu larger than 1500) hangs after some traffic

[Stefan Krüger via Redmine <bugtracker-admin@xxxxxxxxxxxxxxxxxxxxx>]

Issue #2292 has been updated by Stefan Krüger.


Sepherosa Ziehau wrote:
> 2012/1/30 Stefan Krüger via Redmine <bugtracker-admin@leaf.dragonflybsd.org>:
> >
> > Issue #2292 has been updated by Stefan Krüger.
> >
> >
> > Sepherosa Ziehau wrote:
> >> 2012/1/27 Stefan Krüger via Redmine <bugtracker-admin@leaf.dragonflybsd.org>:
> >> >
> >> > Issue #2292 has been reported by Stefan Krüger.
> >> >
> >> > ----------------------------------------
> >> > Bug #2292: re interface with jumbo frames (mtu larger than 1500) hangs after some traffic
> >> > http://bugs.dragonflybsd.org/issues/2292
> >> >
> >> > Author: Stefan Krüger
> >> > Status: New
> >> > Priority: Normal
> >> > Assignee:
> >> > Category:
> >> > Target version:
> >> >
> >> >
> >> > How to reproduce:
> >> > ifconfig re0 mtu 4088
> >> > cd /usr; make pkgsrc-create
> >> > wait a bit
> >> > re0 completely hangs; no ping; nothing when tcpdumping; nothing dmesg either
> >> >
> >> > doing a
> >> > ifconfig re0 mtu 1500
> >> > gets it back to life though...
> >>
> >> Can you try turning off txcsum when using jumbo frame on re0? Â i.e.
> >> ifconfig re0 -txcsum
> >>
> >> Best Regards,
> >> sephe
> >>
> >
> > I did:
> >
> > ifconfig re0 -txcsum
> > ifconfig re0 mtu 4088
> > cd /usr; make pkgsrc-create
> >
> > still hangs at 26 % (i.e. after transfering about 124.11 MiB)
> 
> Please test following patch:
> http://leaf.dragonflybsd.org/~sephe/if_re.diff
> 
> Best Regards,
> sephe
> 
> -- 
> Tomorrow Will Never Die

Still hangs :(

# make pkgsrc-create
If problems occur you may have to rm -rf pkgsrc and try again.

mkdir -p /usr/pkgsrc
cd /usr/pkgsrc && git init
Initialized empty Git repository in /usr/pkgsrc/.git/
cd /usr/pkgsrc &&  git remote add origin git://git.dragonflybsd.org/pkgsrcv2.git
cd /usr/pkgsrc && git fetch origin
remote: Counting objects: 1670882, done.
remote: Compressing objects: 100% (519219/519219), done.
Receiving objects:   9% (152313/1670882), 39.48 MiB | 1.21 MiB/s

# ifconfig re0
re0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 4088
        options=1b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING>
...
        media: Ethernet autoselect (1000baseT <full-duplex>)
        status: active

I see some packets though when tcpdump'ing -ni re0:

09:05:47.417598 IP 192.168.0.2.1018 > 192.168.0.1.2049: Flags [.], ack 1, win 65535, length 0
09:07:02.417694 IP 192.168.0.2.1018 > 192.168.0.1.2049: Flags [.], ack 1, win 65535, length 0
09:08:17.417802 IP 192.168.0.2.1018 > 192.168.0.1.2049: Flags [R.], seq 1, ack 1, win 65535, length 0
...

but that's it, no ping, no NFS, no network anymore
----------------------------------------
Bug #2292: re interface with jumbo frames (mtu larger than 1500) hangs after some traffic
http://bugs.dragonflybsd.org/issues/2292

Author: Stefan Krüger
Status: New
Priority: Normal
Assignee: 
Category: 
Target version: 


How to reproduce:
ifconfig re0 mtu 4088
cd /usr; make pkgsrc-create
wait a bit
re0 completely hangs; no ping; nothing when tcpdumping; nothing dmesg either

doing a
ifconfig re0 mtu 1500
gets it back to life though...

uname:
DragonFly v3.1.0.47.ge2743-DEVELOPMENT #0: Tue Jan 24 09:47:50 UTC 2012
    root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC

dmesg:
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbffc000-0xfbffffff,0xfbffb000-0xfbffbfff irq 36 at device 0.0 on pci5
re0: Hardware rev. 0x2c000000; MAC ver. 0x2e; PCI-E 125MHz
miibus0: <MII bus> on re0
rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto


-- 
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account