[DragonFlyBSD - Bug #2292] re interface with jumbo frames (mtu larger than 1500) hangs after some traffic

[Stefan Krüger via Redmine <bugtracker-admin@xxxxxxxxxxxxxxxxxxxxx>]

Issue #2292 has been updated by Stefan Krüger.


Sepherosa Ziehau wrote:
> 2012/1/27 Stefan Krüger via Redmine <bugtracker-admin@leaf.dragonflybsd.org>:
> >
> > Issue #2292 has been reported by Stefan Krüger.
> >
> > ----------------------------------------
> > Bug #2292: re interface with jumbo frames (mtu larger than 1500) hangs after some traffic
> > http://bugs.dragonflybsd.org/issues/2292
> >
> > Author: Stefan Krüger
> > Status: New
> > Priority: Normal
> > Assignee:
> > Category:
> > Target version:
> >
> >
> > How to reproduce:
> > ifconfig re0 mtu 4088
> > cd /usr; make pkgsrc-create
> > wait a bit
> > re0 completely hangs; no ping; nothing when tcpdumping; nothing dmesg either
> >
> > doing a
> > ifconfig re0 mtu 1500
> > gets it back to life though...
> 
> Can you try turning off txcsum when using jumbo frame on re0?  i.e.
> ifconfig re0 -txcsum
> 
> Best Regards,
> sephe
> 

I did:

ifconfig re0 -txcsum
ifconfig re0 mtu 4088
cd /usr; make pkgsrc-create

still hangs at 26 % (i.e. after transfering about 124.11 MiB)


----------------------------------------
Bug #2292: re interface with jumbo frames (mtu larger than 1500) hangs after some traffic
http://bugs.dragonflybsd.org/issues/2292

Author: Stefan Krüger
Status: New
Priority: Normal
Assignee: 
Category: 
Target version: 


How to reproduce:
ifconfig re0 mtu 4088
cd /usr; make pkgsrc-create
wait a bit
re0 completely hangs; no ping; nothing when tcpdumping; nothing dmesg either

doing a
ifconfig re0 mtu 1500
gets it back to life though...

uname:
DragonFly v3.1.0.47.ge2743-DEVELOPMENT #0: Tue Jan 24 09:47:50 UTC 2012
    root@pkgbox64.dragonflybsd.org:/usr/obj/usr/src/sys/X86_64_GENERIC

dmesg:
re0: <RealTek 8111/8168 PCIe Gigabit Ethernet> port 0xe800-0xe8ff mem 0xfbffc000-0xfbffffff,0xfbffb000-0xfbffbfff irq 36 at device 0.0 on pci5
re0: Hardware rev. 0x2c000000; MAC ver. 0x2e; PCI-E 125MHz
miibus0: <MII bus> on re0
rgephy0: <8211B/RTL8169S/8110S media interface> on miibus0
rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto


-- 
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account