DragonFly bugs List (threaded) for 2011-11
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]
[DragonFlyBSD - Bug #2232] acpi - system cannot reboot or power down - 2.13.0.336.gacd31-DEVELOPMENT
Issue #2232 has been reported by Akan Kane.
----------------------------------------
Bug #2232: acpi - system cannot reboot or power down - 2.13.0.336.gacd31-DEVELOPMENT
http://bugs.dragonflybsd.org/issues/2232
Author: Akan Kane
Status: New
Priority: Normal
Assignee:
Category:
Target version:
Versions:
Workstation: Lenovo Thinkcentre M58p
DragonFlyBSD: v2.13.0.336.gacd31-DEVELOPMENT X86_64_GENERIC x86_64
#########
Problem Overview:
My system cannot reboot or power down using ACPI. It stops after the following:
Syncing disks…
done
Uptime: 11m24s
I've tried with the commands:
shutdown -p now
shutdown -r now
reboot
power down and reboot work okay with FreeBSD 9.0 RC1
#########
ACPI info from sysctl:
hw.acpi.power_button_state: S5
dfbsdp# sysctl -a | grep -i acpi
kern.cputimer.select: HPET ACPI-safe24 i8254_timer2 dummy
debug.acpi.level: NONE
debug.acpi.layer: NONE
debug.acpi.suspend_bounce: 0
debug.acpi.do_powerstate: 1
debug.acpi.acpi_ca_version: 20110211
debug.acpi.ec.timeout: 750
debug.acpi.ec.polled: 0
debug.acpi.ec.burst: 0
debug.acpi.semaphore_debug: 0
hw.acpi.supported_sleep_state: S3 S4 S5
hw.acpi.power_button_state: S5
hw.acpi.sleep_button_state: S3
hw.acpi.lid_switch_state: NONE
hw.acpi.standby_state: S1
hw.acpi.suspend_state: S3
hw.acpi.sleep_delay: 1
hw.acpi.s4bios: 0
hw.acpi.verbose: 1
hw.acpi.disable_on_reboot: 0
hw.acpi.handle_reboot: 1
hw.acpi.reset_video: 1
hw.acpi.cpu.cx_lowest: C1
hw.acpi.cpu0.cx_supported: C1/1 C2/1
hw.acpi.cpu0.cx_lowest: C1
hw.acpi.cpu0.cx_usage: 100.00% 0.00% last 5000us
machdep.acpi_timer_freq: 3579545
machdep.acpi_root: 1009904
#########
dfbsdp# acpiconf -s S5
acpiconf: invalid sleep type (5)
#########
# acpidump -dt > out.asl
Output from "iasl out.asl":
your.asl 1264: Method (WQA0, 1, NotSerialized)
Warning 1088 - ^ Not all control paths return a value (WQA0)
your.asl 2122: And (CAPB, 0xFFFFFFFC)
Warning 1106 - ^ Result is not used, operator has no effect
your.asl 2123: Or (CAPB, 0x00)
Warning 1106 - ^ Result is not used, operator has no effect
your.asl 2290: DWordMemory (ResourceProducer, PosDecode, MinFixed, MaxFixed, Cacheable, ReadWrite,
Error 4123 - ^ Min/Max/Length/Gran are all zero, but no resource tag
your.asl 2926: Name (NATA, Package (0x03)
Remark 5048 - ^ Initializer list shorter than declared package length
your.asl 3386: Or (0x03, PARM)
Warning 1106 - ^ Result is not used, operator has no effect
your.asl 9648: Method (_WAK, 1, NotSerialized)
Warning 1081 - ^ Reserved method must return a value (Integer/Package required for _WAK)
ASL Input: your.asl - 11164 lines, 411038 bytes, 4585 keywords
Compilation complete. 1 Errors, 5 Warnings, 1 Remarks, 1259 Optimizations
#########
Followed the debug instructions for acpi in http://www.dragonflybsd.org/docs/handbook/handbook-acpi-debug/ but cannot set the debug layers/levels
# cd /sys/dev/acpica5 && make clean && make ACPI_DEBUG=1
# mv acpi.ko /boot/kernel
Adding the below to /boot/loader.conf causes a crash during boot. The error is "Fail trap 12: page fail while in kernel mode" and then enters DD:
debug.acpi.layer="ACPI_ALL_COMPONENTS ACPI_ALL_DRIVERS"
debug.acpi.level="ACPI_LV_ERROR"
Adding those options using sysctl causes the system to hang (although I can turn on and off num lock on the keyboard in this state)
#########
Attached dmesg and messages after verbose boot
--
You have received this notification because you have either subscribed to it, or are involved in it.
To change your notification preferences, please click here: http://bugs.dragonflybsd.org/my/account
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]