DragonFly bugs List (threaded) for 2009-08
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]
Re: panic: ahci_put_err_ccb(1) but CI 00000002 != 0
On Sat, Aug 22, 2009 at 10:05:01AM -0700, Matthew Dillon wrote:
> Hmm. Very interesting. It is getting a PRCS interrupt while it
> is trying to send a software reset, then attempting to restart
> the software reset. Oh joy. I clear any pending PRCS from the port
> hardreset sequence so that means the target device is resetting
> its PHY when we try to send a device reset to it, which it is not
> supposed to do.
>
> Try this patch. It is completely untested (other then a compile test):
>
> fetch http://apollo.backplane.com/DFlyMisc/ahci14.patch
>
> If that doesn't work try also (with patch still applied) increasing
> the timeout in the ahci_poll() command in ahci_pm_port_probe() around
> line around line 145 from 1000 to 5000.
It doesn't panic anymore, but it says `Device on port is bricked'.
Increasing the timeout in ahci_poll() command on line 145 doesn't help
(same console message).
By the way the controller is JMB360 from JMicron, and I found a very
old patch against linux kernel:
http://lkml.org/lkml/2006/1/29/2
but the driver has been quite reorganized since then, so I have no idea
how this patch fits in our ahci driver.
ahci0.pci3.pcib3.pci0.pcib0.legacy0.nexus0.root0
ahci0: <AHCI-PCI-SATA> [tentative] port 0x9400-0x940f,0x9480-0x9483,0x9800-0x9807,0x9880-0x9883,0x9c00-0x9c07 mem 0xff3fe000-0xff3fffff irq 24 at device 0.0 on pci3
ahci0: Reserved 0x2000 bytes for rid 0x24 tpe 3 at 0xff3fe000
ahci0: AHCI 1.0 capabilities 0xc722ff00<S64A,NCQ,SALP,SAL,SCLO,SPM,PMD,SSC,PSC>, 1 ports 32 tags/port, gen 1 (1.5Gbps) and 2 (3Gbps)
IOAPIC: try clearing IRR for irq 24
ahci0.0: START HARDRESET
ahci0.0: Transient Errors during reset: 0 (ignored)
ahci0.0.15: Poll timeout slot 1 CMD: 6c111<HPCP,PMA,CR,FR,FRE,ST> TFD: 0x77<ERR> SERR: 40000<DIAG.W>
ahci0.0: PMPROBE First FIS failed
ahci0.0.15: Poll timeout slot 1 CMD: 6c111<HPCP,PMA,CR,FR,FRE,ST> TFD: 0x77<ERR> SERR: 40000<DIAG.W>
ahci0.0: PMPROBE First FIS failed
ahci0.0: Device on port is bricked
ahci0.0: END HARDRESET 16
ahci0.0: Failing all commands
(probe0:ahci0:0:0:0) error 22
(probe0:ahci0:0:0:0) Unretryable Error
.. this repeats for ahci0:0:14:0
[
Date Prev][
Date Next]
[
Thread Prev][
Thread Next]
[
Date Index][
Thread Index]