Re: USB keyboard problems

[Dave Leimbach <leimySPAM2k@xxxxxxx>]

One more issue.  If I turn off USB legacy keyboard support and leave
USB legacy mouse support on the mouse still works in FBSD but the
keyboard does not...

Quite interesting :).  I am not even sure if the KVM is involved in
this mess but my aim is to find out this evening.

Dave

Dave Leimbach <leimySPAM2k@xxxxxxx> writes:

> I finally got a few minutes to play with several keyboards and CMOS options
> to see what is going on with my keyboard on my ASUS A7N8X-Deluxe
> motherboard.  I need USB Legacy Keyboard and Mouse support enabled for
> things like GRUB and Plan 9 but when I boot into DragonFly with this
> CMOS option enabled I can't use my keyboard.
> 
> If I turn off legacy USB support on the keyboard it works fine in
> DragonFly but not in GRUB [at all].  I can of course just twiddle the
> bits when I boot dragonfly as a workaround for now but this seems like
> a bug that needs fixing as I don't have this problem in Windows or
> other OSes...
> 
> I wish I had more information than a dmesg dump but here it is:
> 
> ----------------------------------------------------------------------
> Copyright (c) 2003-2004 The DragonFly Project.
> Copyright (c) 1992-2003 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
> 1994
>         The Regents of the University of California. All rights
> reserved.
> DragonFly 1.0-CURRENT #4: Wed Jan  7 00:06:55 CST 2004
>     root@xxxxxxxxxxxxxxxx:/usr/obj/usr/src/sys/GENERIC
> Timecounter "i8254"  frequency 1193182 Hz
> CPU: AMD Athlon(tm) XP 2800+ (2079.56-MHz 686-class CPU)
>   Origin = "AuthenticAMD"  Id = 0x6a0  Stepping = 0
>   Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
>   AMD Features=0xc0400000<AMIE,DSP,3DNow!>
> real memory  = 1073676288 (1048512K bytes)
> avail memory = 1033719808 (1009492K bytes)
> Preloaded elf kernel "/kernel" at 0xc0583000.
> Pentium Pro MTRR support enabled
> md0: Malloc disk
> Using $PIR table, 11 entries at 0xc00fdeb0
> npx0: <math processor> on motherboard
> npx0: INT 16 interface
> pcib0: <Host to PCI bridge> on motherboard
> pci0: <PCI bus> on pcib0
> agp0: <NVIDIA nForce2 AGP Controller> mem 0xd8000000-0xdbffffff at device 0.0 on pci0
> pci0: <unknown card> (vendor=0x10de, dev=0x01eb) at 0.1
> pci0: <unknown card> (vendor=0x10de, dev=0x01ee) at 0.2
> pci0: <unknown card> (vendor=0x10de, dev=0x01ed) at 0.3
> pci0: <unknown card> (vendor=0x10de, dev=0x01ec) at 0.4
> pci0: <unknown card> (vendor=0x10de, dev=0x01ef) at 0.5
> isab0: <NVIDIA nForce2 PCI to ISA bridge> at device 1.0 on pci0
> isa0: <ISA bus> on isab0
> pci0: <unknown card> (vendor=0x10de, dev=0x0064) at 1.1
> ohci0: <OHCI (generic) USB controller> mem 0xe2086000-0xe2086fff irq 5 at device 2.0 on pci0
> installed MI handler for int 5
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 3 ports with 3 removable, self powered
> uhub1: Texas Instruments TUSB2046 hub, class 9/0, rev 1.10/1.25, addr 2
> uhub1: 4 ports with 4 removable, self powered
> ukbd0: ATEN 4 Port USB KVM B V1.30, rev 1.10/1.00, addr 3, iclass 3/1
> kbd1 at ukbd0
> ums0: ATEN 4 Port USB KVM B V1.30, rev 1.10/1.00, addr 3, iclass 3/1
> ums0: 5 buttons and Z dir.
> ohci1: <OHCI (generic) USB controller> mem 0xe2081000-0xe2081fff irq 11 at device 2.1 on pci0
> installed MI handler for int 11
> usb1: OHCI version 1.0, legacy support
> usb1: SMM does not respond, resetting
> usb1: <OHCI (generic) USB controller> on ohci1
> usb1: USB revision 1.0
> uhub2: nVidia OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 3 ports with 3 removable, self powered
> pci0: <unknown card> (vendor=0x10de, dev=0x0066) at 4.0 irq 11
> pci0: <unknown card> (vendor=0x10de, dev=0x006b) at 5.0 irq 11
> pci0: <unknown card> (vendor=0x10de, dev=0x006a) at 6.0 irq 5
> pcib1: <NVIDIA nForce2 PCI-PCI bridge> at device 8.0 on pci0
> pci1: <PCI bus> on pcib1
> pci1: <unknown card> (vendor=0x1095, dev=0x3112) at 11.0 irq 11
> atapci0: <NVIDIA nForce ATA133 controller> port 0xf000-0xf00f at device 9.0 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> installed MI handler for int 14
> ata1: at 0x170 irq 15 on atapci0
> installed MI handler for int 15
> pcib2: <PCI to PCI bridge (vendor=10de device=006d)> at device 12.0 on pci0
> pci2: <PCI bus> on pcib2
> xl0: <3Com 3c920B-EMB Integrated Fast Etherlink XL> port 0xb000-0xb07f mem 0xdd000000-0xdd00007f irq 5 at device 1.0 on pci2
> xl0: Ethernet address: 00:26:54:0b:d1:56
> miibus0: <MII bus> on xl0
> ukphy0: <Generic IEEE 802.3u media interface> on miibus0
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> fwohci0: vendor=10de, dev=6e
> fwohci0: <1394 Open Host Controller Interface> mem 0xe2084000-0xe208403f,0xe2083000-0xe20837ff irq 11 at device 13.0 on pci0
> fwohci0: OHCI version 1.10 (ROM=0)
> fwohci0: No. of Isochronous channel is 4.
> fwohci0: EUI64 00:e0:18:00:00:19:ad:86
> fwohci0: Phy 1394a available S400, 2 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> if_fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: 02:e0:18:19:ad:86
> sbp0: <SBP2/SCSI over firewire> on firewire0
> fwohci0: Initiate bus reset
> pcib3: <NVIDIA nForce2 PCI-PCI bridge> at device 30.0 on pci0
> pci3: <PCI bus> on pcib3
> pci3: <NVidia model 0281 graphics accelerator> at 0.0 irq 5
> orm0: <Option ROMs> at iomem 0xd0000-0xd3fff,0xd4000-0xd57ff,0xd6000-0xda7ff on isa0
> fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
> installed MI handler for int 6
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
> atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
> device_probe_and_attach: atkbd0 attach returned 6
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> installed MI handler for int 4
> sio1 at port 0x2f8-0x2ff irq 3 on isa0
> sio1: type 16550A
> installed MI handler for int 3
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/16 bytes threshold
> plip0: <PLIP network interface> on ppbus0
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> installed MI handler for int 7
> installed MI handler for int 0
> installed MI handler for int 8
> ad0: 38166MB <WDC WD400BB-00DGA0> [77545/16/63] at ata0-master UDMA100
> WARNING: "ad" is usurping "ad"'s cdevsw[]
> ad1: 38166MB <WDC WD400BB-00CAA0> [77545/16/63] at ata0-slave UDMA100
> acd0: DVD-ROM <SONY DVD-ROM DDU1612> at ata1-master PIO4
> Mounting root from ufs:/dev/ad1s1a
> 
> ----------------------------------------------------------------------
> 
> Let me know if you need more information.  This is a fairly busy work
> week for me but I can probably do more stuff in my evenings 
> [GMT -06:00]
> 
> Other than that the new USB stuff seems to work very well.
> 
> Dave