dellmini9
DragonFly bop.ideasyncratic.net 2.5.1-DEVELOPMENT DragonFly v2.5.1.134.g04709-DEVELOPMENT #0: Mon Oct 26 19:04:51 CDT 2009 elijah@bop.ideasyncratic.net:/usr/obj/usr/src/sys/GENERIC i386
Installed from late October 2009 snapshot usb image.
At the bootloader, select option "7. Escape to loader prompt", then
load ehci
boot
Ethernet works. Wireless does not work. Sound not tested. X11 not tested. Suspend/Resume not tested.
pciconf -l -v
hostb0@pci0:0:0:0: class=0x060000 card=0x02b01028 chip=0x27ac8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 945GME Express Processor to DRAM Controller'
class = bridge
subclass = HOST-PCI
vgapci0@pci0:0:2:0: class=0x030000 card=0x02b01028 chip=0x27ae8086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 945 Express Chipset Family'
class = display
subclass = VGA
vgapci1@pci0:0:2:1: class=0x038000 card=0x02b01028 chip=0x27a68086 rev=0x03 hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile 945GM/GU Express Integrated Graphics Controller'
class = display
none0@pci0:0:27:0: class=0x040300 card=0x02b01028 chip=0x27d88086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) High Definition Audio'
class = multimedia
subclass = HDA
pcib1@pci0:0:28:0: class=0x060400 card=0x02b01028 chip=0x27d08086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCIe Root Port'
class = bridge
subclass = PCI-PCI
pcib2@pci0:0:28:1: class=0x060400 card=0x02b01028 chip=0x27d28086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCIe Root Port'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:2: class=0x060400 card=0x02b01028 chip=0x27d48086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) PCIe Root Port'
class = bridge
subclass = PCI-PCI
uhci0@pci0:0:29:0: class=0x0c0300 card=0x02b01028 chip=0x27c88086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci1@pci0:0:29:1: class=0x0c0300 card=0x02b01028 chip=0x27c98086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci2@pci0:0:29:2: class=0x0c0300 card=0x02b01028 chip=0x27ca8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
uhci3@pci0:0:29:3: class=0x0c0300 card=0x02b01028 chip=0x27cb8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB Universal Host Controller'
class = serial bus
subclass = USB
none1@pci0:0:29:7: class=0x0c0320 card=0x02b01028 chip=0x27cc8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) USB 2.0 Enhanced Host Controller'
class = serial bus
subclass = USB
pcib4@pci0:0:30:0: class=0x060401 card=0x02b01028 chip=0x24488086 rev=0xe2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x02b01028 chip=0x27b98086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801GBM (ICH7-M) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:1: class=0x01018a card=0x02b01028 chip=0x27df8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) Ultra ATA Storage Controller'
class = mass storage
subclass = ATA
none2@pci0:0:31:3: class=0x0c0500 card=0x02b01028 chip=0x27da8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801G (ICH7 Family) SMBus Controller'
class = serial bus
subclass = SMBus
none3@pci0:2:0:0: class=0x088000 card=0x02b01028 chip=0x2382197b rev=0x00 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'JMB38X JMB38X SD/MMC Host Controller'
class = base peripheral
none4@pci0:2:0:2: class=0x080501 card=0x02b01028 chip=0x2381197b rev=0x00 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'Standard SD Host Controller'
class = base peripheral
subclass = SD host controller
none5@pci0:2:0:3: class=0x088000 card=0x02b01028 chip=0x2383197b rev=0x00 hdr=0x00
vendor = 'JMicron Technology Corp.'
device = 'JMB38X JMB38X MS Host Controller'
class = base peripheral
none6@pci0:3:0:0: class=0x028000 card=0x04b514e4 chip=0x431514e4 rev=0x01 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM4315/BCM22062000 Broadcom Wireless b/g'
class = network
re0@pci0:4:0:0: class=0x020000 card=0x02b01028 chip=0x813610ec rev=0x02 hdr=0x00
vendor = 'Realtek Semiconductor'
device = 'RTL8100-8101E-8102E-PCIEXPRESS RTL8100E/RTL8101E/RTL8102E-GR'
class = network
subclass = ethernet
dmesg
Copyright (c) 2003-2009 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly v2.5.1.134.g04709-DEVELOPMENT #0: Mon Oct 26 19:04:51 CDT 2009
elijah@bop.ideasyncratic.net:/usr/obj/usr/src/sys/GENERIC
TSC clock: 1596037272 Hz, i8254 clock: 1193209 Hz
CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1596.01-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x106c2 Stepping = 2
Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE>
Hyperthreading: 2 logical CPUs
real memory = 1064108032 (1039168K bytes)
avail memory = 1018646528 (994772K bytes)
kbd1 at kbdmux0
Pentium Pro MTRR support enabled
md0: Malloc disk
ACPI: RSDP 0xf7f70 00024 (v2 PTLTD )
ACPI: XSDT 0x3f6dc059 0006C (v1 PTLTD XSDT 06040000 LTP 00000000)
ACPI: FACP 0x3f6e1d48 000F4 (v3 INTEL CALISTGA 06040000 ALAN 00000001)
ACPI: DSDT 0x3f6dcf3e 04D96 (v1 INTEL CALISTGA 06040000 INTL 20050624)
ACPI: FACS 0x3f6e2fc0 00040
ACPI: APIC 0x3f6e1e3c 00068 (v1 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: HPET 0x3f6e1ea4 00038 (v1 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: MCFG 0x3f6e1edc 0003C (v1 INTEL CALISTGA 06040000 LOHR 0000005A)
ACPI: TCPA 0x3f6e1f18 00032 (v1 PTLTD CALISTGA 06040000 PTL 00000001)
ACPI: TMOR 0x3f6e1f4a 00026 (v1 PTLTD 06040000 PTL 00000003)
ACPI: APIC 0x3f6e1f70 00068 (v1 PTLTD APIC 06040000 LTP 00000000)
ACPI: BOOT 0x3f6e1fd8 00028 (v1 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 0x3f6dc0c5 004F6 (v2 PmRef CpuPm 00003000 INTL 20050624)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <PTLTD XSDT> on motherboard
acpi0: Power Button (fixed)
Warning: ACPI is disabling APM's device. You can't run both
$PIR: checksum failed!
acpi_ec0: <Embedded Controller: GPE 0x19> port 0x66,0x62 on acpi0
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu_cst0: <ACPI CPU C-State> on cpu0
ACPI: SSDT 0x3f6dc5bb 005E5 (v2 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 0x3f6dcc25 00245 (v2 PmRef Cpu0Ist 00003000 INTL 20050624)
cpu_pst0: <ACPI CPU P-State> on cpu0
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
ACPI: domain0 misses processors, should be 2, got 1
psm0: failed to get data.
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model Generic PS/2 mouse, device ID 0
cryptosoft0: <software crypto> on motherboard
pcib0: <Host to PCI bridge> pcibus 0 on motherboard
pci0: <PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x1800-0x1807 mem 0xf0300000-0xf033ffff,0xd0000000-0xdfffffff,0xf0000000-0xf007ffff irq 7 at device 2.0 on pci0
agp0: <Intel 945GME SVGA controller> on vgapci0
agp0: detected 7932k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf0080000-0xf00fffff at device 2.1 on pci0
pci0: <multimedia, HDA> (vendor 0x8086, dev 0x27d8) at device 27.0 irq 10
pcib1: <PCI-PCI bridge> irq 11 at device 28.0 on pci0
pcib1: Disable PCI Express hot-plug interrupts(0x0008)
pci2: <PCI bus> on pcib1
pci2: <base peripheral> (vendor 0x197b, dev 0x2382) at device 0.0 irq 7
pci2: <base peripheral, SD host controller> (vendor 0x197b, dev 0x2381) at device 0.2 irq 7
pci2: <base peripheral> (vendor 0x197b, dev 0x2383) at device 0.3 irq 7
pcib2: <PCI-PCI bridge> irq 7 at device 28.1 on pci0
pcib2: Disable PCI Express hot-plug interrupts(0x0008)
pci3: <PCI bus> on pcib2
pci3: <network> (vendor 0x14e4, dev 0x4315) at device 0.0 irq 11
pcib3: <PCI-PCI bridge> irq 11 at device 28.2 on pci0
pcib3: Disable PCI Express hot-plug interrupts(0x0008)
pci4: <PCI bus> on pcib3
re0: <RealTek 810x PCIe 10/100baseTX> port 0x2000-0x20ff mem 0xf0600000-0xf060ffff,0xf0610000-0xf0610fff irq 11 at device 0.0 on pci4
re0: Hardware rev. 0x24800000; MAC ver. 0x15; PCI-E 125MHz
miibus0: <MII bus> on re0
rlphy0: <RTL8201L 10/100 media interface> on miibus0
rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
re0: MAC address: 00:21:70:f6:8c:ed
uhci0: <Intel 82801G (ICH7) USB controller> port 0x1820-0x183f irq 5 at device 29.0 on pci0
usb0: <Intel 82801G (ICH7) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801G (ICH7) USB controller> port 0x1840-0x185f irq 10 at device 29.1 on pci0
usb1: <Intel 82801G (ICH7) USB controller> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801G (ICH7) USB controller> port 0x1860-0x187f irq 11 at device 29.2 on pci0
usb2: <Intel 82801G (ICH7) USB controller> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801G (ICH7) USB controller> port 0x1880-0x189f irq 7 at device 29.3 on pci0
usb3: <Intel 82801G (ICH7) USB controller> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
pci0: <serial bus, USB> (vendor 0x8086, dev 0x27cc) at device 29.7 irq 5
pcib4: <PCI-PCI bridge> at device 30.0 on pci0
pci5: <PCI bus> on pcib4
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH7 UDMA100 controller> port 0x1810-0x181f,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ad0: FAILURE - SETFEATURES ENABLE RCACHE status=51<READY,DSC,ERROR> error=1<ILLEGAL_LENGTH>
ad0: 14694MB <STEC PATA 16GB E5221-10> at ata0-master UDMA100
ata1: <ATA channel 1> on atapci0
pci0: <serial bus, SMBus> (vendor 0x8086, dev 0x27da) at device 31.3 irq 10
orm0: <Option ROMs> at iomem 0xcf000-0xcffff,0xe0000-0xe17ff on isa0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: can't drain, serial port might not exist, disabling
sio1: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
ip: MPSAFE
arp: MPSAFE
CAM: Configuring 2 busses
CAM: finished configuring all busses (0 left)
Mounting root from ufs:/dev/serno/STM0000C03CF.s1a
tryroot serno/STM0000C03CF.s1a
Mounting devfs