delld830
Mostly superior results now top prio enable mobile broadband via APN to service provided using a terminal window and AT command
AT+CGDCONT=1,"IP","online.telia.se",,0,0
or like current provider said today
AT+CGDCONT=10,,"online.telia.se"
for networking using '*99#'.(Novatel 5520 wireless mobile broadband builtin SIMcard) to try with ppp or likewise Niklas (Tekniklas) BSD loads welcoming all BSD and 1003.1 R&D, advice, comments, benchmarks comparisons (to PC=BSD for instance) discussions and recommendations now getting 109 % capacity. aiming 142 %
system none,Size 16M,Used 16M Avail -1.2M,Capacity 109%, Mount none
all very well towards user loader displays 3 nonblocker preprompt and pregui loader curiosities:
filesystem checks cd 9660 /dev/cd0c:Invalid argument
perphaps empty argument or cd0c ought to be cd or cdc like FreeBSD above
/dev/acd0C ok....not found
ok just could be more informative above
pci.conf da0s1,fd0,fd1 mount_msdos
...not as awaited
dmesg:
Copyright (c) 2003-2009 The DragonFly Project.
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
DragonFly 2.2.0-RELEASE #0: Sun Feb 15 17:55:25 PST 2009
root@pkgbox.dragonflybsd.org:/build/usr.obj/usr/src/sys/DFLYLIVE
TSC clock: 2394005832 Hz, i8254 clock: 1193185 Hz
CPU: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (2394.02-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x6fb Stepping = 11
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
Hyperthreading: 2 logical CPUs
real memory = 3756367872 (3668328K bytes)
avail memory = 3637329920 (3552080K bytes)
Preloaded elf kernel "/boot/kernel" at 0xc0809000.
Preloaded elf module "/boot/modules/acpi.ko" at 0xc08092ec.
Pentium Pro MTRR support enabled
md0: Malloc disk
pcibios: BIOS version 2.10
Using $PIR table, 13 entries at 0xc00fa570
ACPI: RSDP @ 0x0xfbb10/0x0024 (v 2 DELL )
ACPI: XSDT @ 0x0xdfe5d200/0x0064 (v 1 DELL M08 0x27D80C0B ASL 0x00000061)
ACPI: FACP @ 0x0xdfe5d09c/0x00F4 (v 4 DELL M08 0x27D80C0B ASL 0x00000061)
ACPI: DSDT @ 0x0xdfe5d800/0x63B2 (v 2 INT430 SYSFexxx 0x00001001 INTL 0x20050624)
ACPI: FACS @ 0x0xdfe6c000/0x0040
ACPI: HPET @ 0x0xdfe5d300/0x0038 (v 1 DELL M08 0x00000001 ASL 0x00000061)
ACPI: APIC @ 0x0xdfe5d400/0x0068 (v 1 DELL M08 0x27D80C0B ASL 0x00000047)
ACPI: ASF! @ 0x0xdfe5d000/0x007E (v 32 DELL M08 0x27D80C0B ASL 0x00000061)
ACPI: MCFG @ 0x0xdfe5d3c0/0x003E (v 16 DELL M08 0x27D80C0B ASL 0x00000061)
ACPI: TCPA @ 0x0xdfe5d700/0x0032 (v 1 0x00000000 ASL 0x00000000)
ACPI: SLIC @ 0x0xdfe5d49c/0x0176 (v 1 DELL M08 0x27D80C0B ASL 0x00000061)
ACPI: SSDT @ 0x0xdfe5b97e/0x04CC (v 1 PmRef CpuPm 0x00003000 INTL 0x20050624)
npx0: <math processor> on motherboard
npx0: INT 16 interface
Using XMM optimized bcopy/copyin/copyout
acpi0: <DELL M08 > on motherboard
ACPI: SSDT @ 0x0xdfe6c080/0x0043 (v 1 LMPWR DELLLOM 0x00001001 INTL 0x20050624)
Warning: ACPI is disabling APM's device. You can't run both
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
ACPI: SSDT @ 0x0xdfe5be4a/0x05E5 (v 1 PmRef Cpu0Cst 0x00003001 INTL 0x20050624)
ACPI: SSDT @ 0x0xdfe5c4b4/0x02C8 (v 1 PmRef Cpu0Ist 0x00003000 INTL 0x20050624)
acpi_tz0: <Thermal Zone> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x66,0x62,0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model GlidePoint, device ID 0
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
legacypci0 on motherboard
pcib0: <Host to PCI bridge> on legacypci0
pci0: <PCI bus> on pcib0
pcib1: <PCI to PCI bridge (vendor=8086 device=2a01)> at device 1.0 on pci0
pci1: <PCI bus> on pcib1
pci1: <NVidia model 0429 graphics accelerator> at 0.0 irq 5
uhci0: <Intel 82801H (ICH8) USB controller USB-D> port 0x6f20-0x6f3f irq 11 at device 26.0 on pci0
usb0: <Intel 82801H (ICH8) USB controller USB-D> on uhci0
usb0: USB revision 1.0
uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801H (ICH8) USB controller USB-E> port 0x6f00-0x6f1f irq 10 at device 26.1 on pci0
usb1: <Intel 82801H (ICH8) USB controller USB-E> on uhci1
usb1: USB revision 1.0
uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
uhub1: 2 ports with 2 removable, self powered
pci0: <USB controller> at 26.7 irq 9
pci0: <unknown card> (vendor=0x8086, dev=0x284b) at 27.0 irq 10
pcib2: <PCI to PCI bridge (vendor=8086 device=283f)> at device 28.0 on pci0
pcib2: Disable PCI Express hot-plug interrupts(0x0008)
pci11: <PCI bus> on pcib2
pcib3: <PCI to PCI bridge (vendor=8086 device=2841)> at device 28.1 on pci0
pcib3: Disable PCI Express hot-plug interrupts(0x0008)
pci12: <PCI bus> on pcib3
pci12: <unknown card> (vendor=0x14e4, dev=0x4328) at 0.0 irq 3
pcib4: <PCI to PCI bridge (vendor=8086 device=2845)> at device 28.3 on pci0
pcib4: Disable PCI Express hot-plug interrupts(0x0008)
pci13: <PCI bus> on pcib4
pcib5: <PCI to PCI bridge (vendor=8086 device=2849)> at device 28.5 on pci0
pcib5: Disable PCI Express hot-plug interrupts(0x0008)
pci9: <PCI bus> on pcib5
bge0: <Broadcom BCM5755M Gigabit Ethernet> mem 0xf1bf0000-0xf1bfffff irq 3 at device 0.0 on pci9
bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
miibus0: <MII bus> on bge0
brgphy0: <BCM5755 10/100/1000baseT PHY> on miibus0
brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
bge0: MAC address: 00:1d:09:ac:e2:3e
uhci2: <Intel 82801H (ICH8) USB controller USB-A> port 0x6f80-0x6f9f irq 11 at device 29.0 on pci0
usb2: <Intel 82801H (ICH8) USB controller USB-A> on uhci2
usb2: USB revision 1.0
uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801H (ICH8) USB controller USB-B> port 0x6f60-0x6f7f irq 10 at device 29.1 on pci0
usb3: <Intel 82801H (ICH8) USB controller USB-B> on uhci3
usb3: USB revision 1.0
uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
uhub3: 2 ports with 2 removable, self powered
uhci4: <Intel 82801H (ICH8) USB controller USB-C> port 0x6f40-0x6f5f irq 9 at device 29.2 on pci0
usb4: <Intel 82801H (ICH8) USB controller USB-C> on uhci4
usb4: USB revision 1.0
uhub4: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
uhub4: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 11
pcib6: <PCI to PCI bridge (vendor=8086 device=2448)> at device 30.0 on pci0
pci3: <PCI bus> on pcib6
cbb0: <PCI-CardBus Bridge> at device 1.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
pcib6: routed slot 1 INTA to irq 255
cbb: Unable to map IRQ...
device_probe_and_attach: cbb0 attach returned 12
fwohci0: vendor=1217, dev=f7
fwohci0: <1394 Open Host Controller Interface> mem 0xf1afe800-0xf1afefff,0xf1aff000-0xf1afffff irq 9 at device 1.4 on pci3
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channel is 8.
fwohci0: EUI64 47:4f:c0:00:02:6a:ac:70
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
fwe0: MAC address: 46:4f:c0:6a:ac:70
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
firewire0: bus manager 0 (me)
isab0: <PCI to ISA bridge (vendor=8086 device=2815)> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ATA controller> port 0x6fa0-0x6faf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 5 at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
uhub5: <vendor 0x0b97 product 0x7761, class 9/0, rev 1.10/1.10, addr 2> on uhub4
uhub5: 4 ports with 3 removable, self powered
acd0: DVDR <Optiarc DVD+/-RW AD-5560A/DD11> at ata0-master UDMA33
ata1: <ATA channel 1> on atapci0
atapci1: <Intel ICH8M SATA300 controller> port 0xeff0-0xefff,0x6ee0-0x6eef,0x6ec8-0x6ecb,0x6ec0-0x6ec7,0x6eb8-0x6ebb,0x6eb0-0x6eb7 irq 10 at device 31.2 on pci0
ata2: <ATA channel 0> on atapci1
ata3: <ATA channel 1> on atapci1
pci0: <unknown card> (vendor=0x8086, dev=0x283e) at 31.3 irq 3
eisa0: <EISA bus> on motherboard
mainboard0: <Y__ffff (System Board)> on eisa0 slot 0
pmtimer0 on isa0
fdc0: ready for input in output
fdc0: cmd 3 failed at out byte 1 of 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio2: can't drain, serial port might not exist, disabling
ppc0: parallel port not found.
ugen0: <vendor 0x413c product 0x8140, class 224/1, rev 2.00/43.15, addr 2> on uhub0
ugen1: <Novatel Wireless Novatel Wireless HSDPA Modem, class 0/0, rev 1.10/0.00, addr 2> on uhub1
ugen2: <O2 O2Micro CCID SC Reader, class 0/0, rev 1.10/1.10, addr 3> on uhub5
Mounting root from cd9660:cd0c
cd0 at ata0 bus 0 target 0 lun 0
cd0: <Optiarc DVD+-RW AD-5560A DD11> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: cd present [619632 x 2048 byte records]
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 17 22 0 0 1 0
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0
(cd0:ata0:0:0:0): No seek complete
(cd0:ata0:0:0:0): Retrying Command (per Sense Data)
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 8 95 74 0 0 1 0
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0
(cd0:ata0:0:0:0): No seek complete
(cd0:ata0:0:0:0): Retrying Command (per Sense Data)
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 3 2d 0 0 1 0
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0
(cd0:ata0:0:0:0): No seek complete
(cd0:ata0:0:0:0): Retrying Command (per Sense Data)
(cd0:ata0:0:0:0): READ(10). CDB: 28 0 0 0 3 27 0 0 1 0
(cd0:ata0:0:0:0): CAM Status: SCSI Status Error
(cd0:ata0:0:0:0): SCSI Status: Check Condition
(cd0:ata0:0:0:0): MEDIUM ERROR asc:2,0
(cd0:ata0:0:0:0): No seek complete
(cd0:ata0:0:0:0): Retrying Command (per Sense Data)
pciconf:
dev 70,root;72,var;74,tmp;76,etc;78;dev,80;usr,82;k
hostb0@pci0:0:0:0: class=0x060000 card=0x01fe1028 chip=0x2a008086 rev=0x0c hdr=0x00
vendor = 'Intel Corporation'
device = 'Mobile PM965/GM965/GL960 Express Processor to DRAM Controller'
class = bridge
subclass = HOST-PCI
pcib1@pci0:0:1:0: class=0x060400 card=0x01fe1028 chip=0x2a018086 rev=0x0c hdr=0x01
vendor = 'Intel Corporation'
device = 'Mobile PM965/GM965/GL960 Express PCIe Root Port'
class = bridge
subclass = PCI-PCI
uhci0@pci0:0:26:0: class=0x0c0300 card=0x01fe1028 chip=0x28348086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
uhci1@pci0:0:26:1: class=0x0c0300 card=0x01fe1028 chip=0x28358086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
none0@pci0:0:26:7: class=0x0c0320 card=0x01fe1028 chip=0x283a8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '81EC1043 (?) ICH8 Enhanced USB2 Enhanced Host Controller'
class = serial bus
subclass = USB
none1@pci0:0:27:0: class=0x040300 card=0x01fe1028 chip=0x284b8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H Intel audio controller embedded with the 82801H chipset ( ICH8 chipset )'
class = multimedia
subclass = HDA
pcib2@pci0:0:28:0: class=0x060400 card=0x01fe1028 chip=0x283f8086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 1'
class = bridge
subclass = PCI-PCI
pcib3@pci0:0:28:1: class=0x060400 card=0x01fe1028 chip=0x28418086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 2'
class = bridge
subclass = PCI-PCI
pcib4@pci0:0:28:3: class=0x060400 card=0x01fe1028 chip=0x28458086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 4'
class = bridge
subclass = PCI-PCI
pcib5@pci0:0:28:5: class=0x060400 card=0x01fe1028 chip=0x28498086 rev=0x02 hdr=0x01
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) PCIe Port 6'
class = bridge
subclass = PCI-PCI
uhci2@pci0:0:29:0: class=0x0c0300 card=0x01fe1028 chip=0x28308086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
uhci3@pci0:0:29:1: class=0x0c0300 card=0x01fe1028 chip=0x28318086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
uhci4@pci0:0:29:2: class=0x0c0300 card=0x01fe1028 chip=0x28328086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB UHCI'
class = serial bus
subclass = USB
none2@pci0:0:29:7: class=0x0c0320 card=0x01fe1028 chip=0x28368086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) USB2 EHCI'
class = serial bus
subclass = USB
pcib6@pci0:0:30:0: class=0x060401 card=0x01fe1028 chip=0x24488086 rev=0xf2 hdr=0x01
vendor = 'Intel Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9-M) Hub Interface to PCI Bridge'
class = bridge
subclass = PCI-PCI
isab0@pci0:0:31:0: class=0x060100 card=0x01fe1028 chip=0x28158086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801HEM (ICH8M-E) LPC Interface Controller'
class = bridge
subclass = PCI-ISA
atapci0@pci0:0:31:1: class=0x01018a card=0x01fe1028 chip=0x28508086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) Ultra ATA Storage Controllers'
class = mass storage
subclass = ATA
atapci1@pci0:0:31:2: class=0x01018f card=0x01fe1028 chip=0x28288086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801 (ICH8M) 3 port SATA Controller'
class = mass storage
subclass = ATA
none3@pci0:0:31:3: class=0x0c0500 card=0x01fe1028 chip=0x283e8086 rev=0x02 hdr=0x00
vendor = 'Intel Corporation'
device = '82801H (ICH8 Family) SMBus Controller'
class = serial bus
subclass = SMBus
vgapci0@pci0:1:0:0: class=0x030000 card=0x01fe1028 chip=0x042910de rev=0xa1 hdr=0x00
vendor = 'Nvidia Corp'
device = 'Unknown nVidia Quadro NVS 135M or Quadro NVS 140M'
class = display
subclass = VGA
none4@pci0:12:0:0: class=0x028000 card=0x000a1028 chip=0x432814e4 rev=0x03 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'BCM4321KFBG Broadcom 432AGN 802.11a/b/g/draft-n Wi-Fi Solution'
class = network
bge0@pci0:9:0:0: class=0x020000 card=0x01fe1028 chip=0x167314e4 rev=0x02 hdr=0x00
vendor = 'Broadcom Corporation'
device = 'NetXtreme BCM5755M Gigabit Ethernet PCIe'
class = network
subclass = ethernet
cbb0@pci0:3:1:0: class=0x060700 card=0x01fe1028 chip=0x71351217 rev=0x21 hdr=0x02
vendor = 'O2 Micro Inc'
device = 'OZ711EZ1 MemoryCardBus Controller'
class = bridge
subclass = PCI-CardBus
fwohci0@pci0:3:1:4: class=0x0c0010 card=0x01fe1028 chip=0x00f71217 rev=0x02 hdr=0x00
vendor = 'O2 Micro Inc'
device = '0x00f71217 1394 Open Host Controller Interface'
class = serial bus
subclass = FireWire
default 2.4.1 (1) bootoutput live and/or installed:
sio2: can't drain, serial port might not exist, disabling
ppc0:parallel port not found (blocked, catatonic, won't respond....)
boot option 2 (ACPI disabled) gets along rather perfect til:
bge0: no link.......
bge0: no carrier.......
...via switch.2716 all is go, network still manually must patchthrough.
main thing compatibilize dell powerconnect switch 2716, straght ethernet cabling ok, boot to linux then via switch works, tried dlfy command ifconfig 0.0.0.0 bge0 up still no carrier via switch though as single client no problem, mostly very impressive results, tripleboot ubuntu karmic, mandriva, dfly ok, mostly learning this and peripherals compatibilizations:
pciconf -lv
vendor= 'Intel'
device = 'Mobile PM965&GM965&GL960 to DRAM'
class = bridge
subclass = PCI-PCI
vendor= 'Intel'
device = 'Mobile PM965&GM965&GL960 to DRAM'
class = bridge
subclass = HOST-PCI
vendor= 'Intel'
device = '82801H ICH8 USB'
class = serial bus
subclass = USB
...
vendor= 'Nvidia'
device = 'Unknown nVidia Quadro NVS 135M or Quadro NVS 140M'
class = display
subclass = VGA
vendor= 'Broadcom Corporation'
device = 'BCM4321KFBG Broadcom 432AGM 802.11a Wi/Fi'
class = network
vendor= 'Broadcom Corporation'
device = 'NetXtreme BCM5755M Gigabit Ethernet PCIe'
class = network
subclass = ethernet
cbb@pci3:1:0: class=0x060700 card=0x01fe1028 chip=0x71351217 rev=0x21 hdr=0x02
. ..cardbus irrelevance...
dmesg
serial ports disabled (by me by bios) parallel port not found . .seemingly irrelevant already working stuff...
bge0 <Broadcom BCM5775M Gigabit Ethernet> mem 0xf1bf0000-0xf1bffff irq
5 at device 0.0 on pci9
bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E
miibus0: <MII bus> on bge0
details boot log via option 2 no ACPI: liveboot ok ppc0 parallel port not found cd9660 dev/cd0 invalid argument then comes online , multiboots, multfilesystems verified Linux,DOS,Hammer same disk same time intermittent dell switch compatibilization via switch powerconnect 2716/ethernet failed status no carrier, /bge0 no link, ifconfig 0.0.0.0 up, still no link, straight via cable its online instantly todo: turbo 3g switch harmonization look at bmake output: .......... 7600 ...
bmake: don't know how to make print-summary-data. Stop WARNING (printdepends): the package in wip/dump had problem with /usr/pkg/bin/bmake print-summary-data
database information for this package will be dropped
bmake: don't know how to make print-summary-data. Stop. unknown modifier: 'x'
.....7700...
fredahead.c:38 implicit function declaration
...
10000 > 5999 previously noted
bmake works, details: Copyright (c) 2003-2009 The DragonFly Project. Copyright (c) 1992-2003 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. DragonFly v2.4.1-RELEASE #4: Wed Sep 30 20:07:33 PDT 2009 root@test28.backplane.com:/usr/obj/usr/src-misc/sys/DFLYLIVE TSC clock: 2394065580 Hz, i8254 clock: 1193214 Hz CPU: Intel(R) Core(TM)2 Duo CPU T7700 @ 2.40GHz (2394.02-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x6fb Stepping = 11 Features=0xbfebfbff Features2=0xe3bd Hyperthreading: 2 logical CPUs real memory = 3756367872 (3668328K bytes) avail memory = 3636994048 (3551752K bytes) kbd1 at kbdmux0 Pentium Pro MTRR support enabled fildesc_drvinit() building stdin, stdout, stderr: md0: Malloc disk npx0: on motherboard npx0: INT 16 interface Using XMM optimized bcopy/copyin/copyout pcib0: pcibus 0 on motherboard pir0: on motherboard pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 vgapci0: port 0xdf00-0xdf7f mem 0xf2000000-0xf3ffffff,0xe0000000-0xefffffff,0xf5000000-0xf5ffffff irq 5 at device 0.0 on pci1 uhci0: port 0x6f20-0x6f3f irq 11 at device 26.0 on pci0 usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x6f00-0x6f1f irq 10 at device 26.1 on pci0 usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered pci0: (vendor 0x8086, dev 0x283a) at device 26.7 irq 9 pci0: (vendor 0x8086, dev 0x284b) at device 27.0 irq 10 pcib2: at device 28.0 on pci0 pci11: on pcib2 pcib3: at device 28.1 on pci0 pci12: on pcib3 pci12: (vendor 0x14e4, dev 0x4328) at device 0.0 irq 3 pcib4: at device 28.3 on pci0 pci13: on pcib4 pcib5: at device 28.5 on pci0 pci9: on pcib5 bge0: mem 0xf1bf0000-0xf1bfffff irq 3 at device 0.0 on pci9 bge0: CHIP ID 0xa0020000; ASIC REV 0x0a; CHIP REV 0xa0; PCI-E alignment check failed miibus0: on bge0 brgphy0: on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto bge0: MAC address: 00:1c:23:b3:9a:b7 uhci2: port 0x6f80-0x6f9f irq 11 at device 29.0 on pci0 usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: port 0x6f60-0x6f7f irq 10 at device 29.1 on pci0 usb3: on uhci3 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered uhci4: port 0x6f40-0x6f5f irq 9 at device 29.2 on pci0 usb4: on uhci4 usb4: USB revision 1.0 uhub4: on usb4 uhub4: 2 ports with 2 removable, self powered pci0: (vendor 0x8086, dev 0x2836) at device 29.7 irq 11 pcib6: at device 30.0 on pci0 pci3: on pcib6 cbb0: irq 9 at device 1.0 on pci3 cardbus0: on cbb0 pccard0: <16-bit PCCard bus> on cbb0 fwohci0: vendor=1217, dev=f7 fwohci0: <1394 Open Host Controller Interface> mem 0xf1afe800-0xf1afefff,0xf1aff000-0xf1afffff irq 9 at device 1.4 on pci3 fwohci0: OHCI version 1.10 (ROM=0) fwohci0: No. of Isochronous channel is 8. fwohci0: EUI64 47:4f:c0:00:02:6a:ac:70 fwohci0: Phy 1394a available S400, 1 ports. fwohci0: Link S400, max_rec 2048 bytes. firewire0: on fwohci0 fwe0: on firewire0 fwe0: MAC address: 46:4f:c0:6a:ac:70 sbp0: on firewire0 fwohci0: Initiate bus reset fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me) firewire0: bus manager 0 (me) isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0x6fa0-0x6faf,0x376,0x170-0x177,0x3f6,0x1f0-0x1f7 irq 5 at device 31.1 on pci0 ata0: on atapci0 uhub5: on uhub4 acd0: DVDR at ata0-master UDMA33 ata1: on atapci0 atapci1: port 0xeff0-0xefff,0x6ee0-0x6eef,0x6ec8-0x6ecb,0x6ec0-0x6ec7,0x6eb8-0x6ebb,0x6eb0-0x6eb7 irq 10 at device 31.2 on pci0 ata2: on atapci1 uhub5: 4 ports with 3 removable, self powered ad4: 152627MB at ata2-master SATA300 ata3: on atapci1 pci0: (vendor 0x8086, dev 0x283e) at device 31.3 irq 3 orm0: